Table of Contents
Advertisement
Quick Links
Operating instructions
Pictured: TH 210/2/MZ
Before using the device for the first time, please read these instructions thoroughly and completely and
Observe and follow the safety instructions and only use the stapler after you are sure you understand
Model
See device label
Type/Designation:
Page 1of 13
17.04.25
P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 EN 04_2025.docx
Pneumatic table stapler
Pneumatic table stapler
IMPORTANT
keep them in a safe place.
Failure to follow these instructions may result in injury!
If you have any questions, please contact the manufacturer,
MEZGER Heftsysteme.
Saganer Straße 24
90475 Nuremberg
+49 (0)911 984 94 0
TH 210
TH 210
all instructions.
Germany
Page:
1
Change: 04/2025
ET
598
Advertisement
Table of Contents
Related Manuals for Mezger TH 210/1
Summary of Contents for Mezger TH 210/1
- Page 1 Observe and follow the safety instructions and only use the stapler after you are sure you understand all instructions. Failure to follow these instructions may result in injury! If you have any questions, please contact the manufacturer, MEZGER Heftsysteme. Saganer Straße 24 90475 Nuremberg Germany...
-
Page 2: Table Of Contents
Safe operation of the stapling device requires the knowledge provided in this ORIGINAL OPERATING INSTRUCTIONS . The information is presented in a concise, clear format. The chapters are arranged numerically. copyright The copyright to this operating manual remains with MEZGER Heftsysteme Table of Contents Conformity ........................3 Safety instructions ......................3 Warranty and Liability .................... -
Page 3: Conformity
Pneumatic table stapler Page: Change: 04/2025 TH 210 conformity This stapler was built in accordance with the following European directives: Machinery Directive 2006/42/EC 2 Safety instructions Safety instructions and important explanations are marked with the following pictograms. The symbols used in this manual and on the stapling device have the following meaning: symbol Signal word Meaning... -
Page 4: Warranty And Liability
Pneumatic table stapler Page: Change: 04/2025 TH 210 3 Warranty and liability In principle, our "General Terms and Conditions of Sale and Delivery" apply. These are available to the operator at the latest upon conclusion of the contract. Warranty and liability claims for personal injury and property damage are excluded if they are due to one or more of the following causes: Improper use of the stapler. -
Page 5: Warranty And Liability
Pneumatic table stapler Page: Change: 04/2025 TH 210 5 Warranty and liability In principle, our "General Terms and Conditions of Sale and Delivery" apply. These are available to the operator at the latest upon conclusion of the contract. Warranty and liability claims for personal injury and property damage are excluded if they are due to one or more of the following causes: Improper use of the machine. -
Page 6: Basics Of Working Technique And Handling
Pneumatic table stapler Page: Change: 04/2025 TH 210 To make the stapler ready for use after delivery, the following tasks must be carried out: Check equipment for completeness Load stapler with staples Connect compressed air The air pressure is 4 - 6 bar overpressure. It is necessary to install a filter regulator consisting of a filter, water separator and pressure reducer. -
Page 7: Maintenance And Care
Pneumatic table stapler Page: Change: 04/2025 TH 210 Maintenance and care ATTENTION! The compressed air supply must be disconnected before any maintenance. Any type of modification to the stapler (e.g. drilling holes) is only permitted with the prior consent and written approval of the manufacturer! Manipulation of the safety device(s) is prohibited! In order to maintain the operational readiness and function of the stapler, it must be checked and cleaned regularly by the operator or by qualified personnel. -
Page 8: Scope Of Application/Purpose
Pneumatic table stapler Page: Change: 04/2025 TH 210 The following work/inspections should be carried out regularly by qualified personnel: • Regularly oil the moving parts (no graphite oil!) (weekly) • Check the filter regulator for condensation. If necessary, remove the condensation. Only genuine spare parts may be used. -
Page 9: Adjusting The Stapler
Pneumatic table stapler Page: Change: 04/2025 TH 210 15 Adjusting the stapler Lateral stapling spacing The insert staplers (EH) can be adjusted to the desired stapling dimensions. To do this, loosen the three screws V1 to move the insert stapler and the associated stapling cylinder with bar L. -
Page 10: No Stapling Or Staple Not Fully Bent Or Remains In The Stapler
Pneumatic table stapler Page: Change: 04/2025 TH 210 16.1 No stapling or staple not fully bent or remains in the stapler Disturbance Caused remedy No pressure display Shut-off valve closed. Open the shut-off valve. Pressure not set. Adjust pressure using pressure adjustment knob. -
Page 11: Reference To Residual Risks
TH 210 without counter with counter TH 210 pneumatic table stapler TH 210/./OZ TH 210/./MZ TH 210/1 with 1 built-in stapler TH 210/1/OZ TH 210/1/MZ TH 210/2 with 2 built-in staplers TH 210/2/OZ TH 210/2/MZ TH 210/3 with 3 built-in staplers... -
Page 12: Technical Documents/Service
- Hold the device with a light and secure grip, as the risk of vibration is greater when the gripping force is higher. Technical documents/service Repairs by: MEZGER Heftsysteme GmbH Page 12of 13 17.04.25 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 EN 04_2025.docx... -
Page 13: Spare Parts List
Keep the operating instructions, safety instructions, spare parts list and receipt in a safe place. Order form for spare and wear parts MEZGER Heftsysteme GmbH Saganer Straße 24, 90475 Nuremberg Phone: 0049 (0)911 / 984 94 0 Email: Staples, staplers and stapling machines info@mezger.eu...
Need help?
Do you have a question about the TH 210/1 and is the answer not in the manual?
Questions and answers