Subscribe to Our Youtube Channel
Related Manuals for Home electric TC-840
Summary of Contents for Home electric TC-840
- Page 1 Operating Instructions Stand Mixer TC-840 Before operating this unit, please read these instructions completely (If the product pictures are inconsistent,the actual product shall prevail) Page 1 of 18...
- Page 2 Features Dough hook Bottom cover Top cover Mixing blade Upper housing Bowl cover Unlock lever Mixing bowl Lower body Egg whisk Control switch Suction feet+ Sensor Pressure Page 2 of 18...
-
Page 3: Important Safety Advice
Important safety advice Do not use the device when the head is lifted up. To avoid electric shocks, do not use this device in the vicinity of water. Do not immerse the mains lead in water or other liquid. ... - Page 4 Repairs should only be carried out in a qualified workshop. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. The device should only be used for its intended purpose. ...
-
Page 5: Short-Time Operation
- Bed and breakfast type environments. Be careful when handing the sharp cutting blades, emptying the bowl and during cleaning Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming Short-time operation The appliance has been designed for short-term operation only. - Page 6 Protection class: Capacity: 5.0L Page 6 of 18...
-
Page 7: Before Using For The First Time
Before using for the first time Before the appliance is used for the first time, all attachments and accessory parts must be cleaned as described in the section Cleaning and care Commissioning Mix the food ingredients thoroughly in accordance with the detail in the recipe; Then lift up the unlock lever(4) and swing up the drive arm.Fig.2 Fig.3 Fig.2... -
Page 8: Operation
Fig.5 Fig.6 Fig.7 4. Then Press down the unlock lever(4) and press the upper housing(3) downwards with one hand. Fig.6 Fig.7 5. Insert the power plug in the power socket ,The appliance is now ready to use. Operation： 1.Power on/off： 1.1 The machine is connected to the power supply, the screen lights up, all icons stay on, and the machine enters standby operable mode. - Page 9 to 30%. 1.3 In standby mode, long press the "Start/Pause" button for 5 seconds to shut down the machine. 1.4 In the shutdown state, press the "Start/Pause" button to turn on the device. 2.Preparation Settings： 2.1 Time setting: Press the time display icon, keep it on, then turn the knob clockwise to increase the time;...
- Page 10 Time can be adjusted before/during machine operation. Click on the time icon, the time icon will light up to 100% and flash. At this point, the time can be adjusted. After adjusting the time, the time icon will flash for 5 seconds and then dim to 30%.
- Page 11 adjusted. After adjusting the time, the time icon will flash for 5 seconds and then dim to 30%. The default working hours cannot be reduced. The machine shall be kept running when adjusting the time during operation. 3.4 Manual mode： Manual mode can run in either forward or countdown mode.
- Page 12 flash, and the temperature can be adjusted at this time. The time and temperature adjustment machine shall be kept running during operation. 3.6 Electronic scale mode： The machine base is equipped with 4 pressure sensors, with a load capacity of 20KG and a weighing range of 0-5KG.
- Page 13 2. For whipping cream, whip 250ml fresh cream at speed 12 for about 4 minutes. 3. When filling the mixing bowl with fresh milk, cream or other ingredients, please ensure that the maximum quantity is not exceeded. 4. The egg whisk should be used. Mixing shakes, cocktails or other liquids: 1.
- Page 14 For medium mixtures This hook is useful for medium mixtures such as thick batter-mix and mashed potatoes, using the speed settings 5-11. For heavy dough This hook is suitable for processing heavy dough using the speed settings 1-4. Please do not use it in low speed for a long time. Recommendations for speed levels Gear Attachment...
-
Page 15: Commissioning, Operation
Commissioning (Operation): ● Before fitting, changing, removing or cleaning any attachments, ensure that the appliance has been switched off and disconnected from the mains. ● Caution: After switching off, always wait until the motor has come to a complete standstill. Do not touch any moving parts. ●... -
Page 16: Packing List
● Push the attachment upwards all the way, then unlock it by turning it clockwise (about 90°) and remove it from its mounting. ● Remove the splash-guard ring. ● Unlock the bowl by turning it anti-clockwise and remove it. Cleaning Warning! To prevent the risk of electric shock, injury or damage: - Disconnect the power supply plug from the mains socket before cleaning. - Page 17 Warning! To prevent the risk of electric shock, injury or damage: - Disconnect the power supply plug from the mains socket before cleaning. - Never immerse the base unit in water. Caution! Never use scouring, corrosive or abrasive cleaning materials as these could damage the appliance.
- Page 18 The device complies with the European Directives 2014/35/EU and 2014/30/EU. At the end of its service life, this product may not be disposed of in the normal household waste, but rather must be disposed of at a collection point for recycling electrical and electronic devices.
Need help?
Do you have a question about the TC-840 and is the answer not in the manual?
Questions and answers