Related Manuals for YEEUU W1
Summary of Contents for YEEUU W1
- Page 1 W1 Smart Deadbolt User Guide We are committed to ensuring you have a smooth setup experience.
-
Page 2: Important Notes
Dry, wet, oily, or dirty fingers may affect the identification of fingerprints. Fingerprint Identification The old and the young have shallow fingerprints, which may make the W1 recognition system less sensitive. Press " " to lock W1 automatically. Outdoor locking Be sure to use 4*AA Alkaline Batteries (LR6 marked on the package). -
Page 3: What's In The Box
WHAT'S IN THE BOX Exterior Assembly*1 Interior Assembly*1 Mounting Plate*1 Deadbolt*1 Connecting Screw*2 Self-tapping Screw M4*4 Strike Plate*1 Bottom Base Screws*2 Ejection Pin*1 Emergency Key*2 PRODUCT OVERVIEW Mounting Plate Rear Cover USB Port Interior Assembly Keyhole Exterior Assembly Front Cover Direction Toggle Self-tapping Screws Deadbolt... -
Page 4: Technical Parameters
(25.4mm) Door Hole Diameter： ” Ensure the conditions below for the proper installation of the W1. Measure to confirm that your door and door frame fit the dimensions shown. Please remove your original door and bolt. * The original strike box can be retained for use. -
Page 5: Installing Guide
INSTALLING GUIDE 1. Installing Bolt Adjust the Deadbolt to 2 "/60mm or 2¾"/70mm according to the Backset, and insert it into the door hole with Self-tapping Screws to tighten. Press the Strike Plate into the slot as The Backset can adjust from 2 "/60mm to shown and fix it with Self-tapping Screws. - Page 6 W1 can be locked and unlocked smoothly with the the lock smoothly. emergency key after removing the key cover. W1 is not bound to the App at this moment. Any Remove the batteries and use a power bank to fingerprint and initial code " 123456 + "...
- Page 7 Dead Status: W1 will reject identifying any fingerprint, or code after repeated identification errors, which can effectively prevent unauthorized members from violent unlocking. Trigger Conditions: W1 will lock for 5 minutes after 10 consecutive failed accesses (fingerprint/code) within 2 minutes. W1 will flash the RED indicator 5 times for any access during the period.
- Page 8 FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the W1 and is the answer not in the manual?
Questions and answers