Need Help? Questions about your new R2 Smart Lock? Please scan the QR code to our support page. Please don’t return it to the store! Let us help you first. Email us: support@yeeuu.com www.yeeuu.com...
PRECAUTIONS FOR USE Please read the following precautions carefully to have a better using experience. Any fingerprints can unlock R2 at FACTORY DEFAULT MODE. Locking Mechanism: R2 will automatically lock after unlocking for 3 seconds. R2 only supports Android NFC devices right now. R2 required 2*AAA Alkaline Batteries(LR03).
Lock Parts Indicator Light Fingerprint Identification Area Card Identification Area Battery Cover Temporary Lock Button Temporarily lock R2 during unlock status Battery Screw...
Page 9
TOOLS NEEDED You will need a standard Phillips screwdriver Confirm the following dimensions. The thickness of the door is between 1-1/8"~2-3/8"(30-60mm). The diameter of the hole is 2-1/8"(54mm). The backset is either 2-3/8" OR 2-3/4" (60mm or 70mm). The diameter of the hole in the door edge is 1"(25mm). 2-3/8"...
Page 10
1.1 Installing the Latch Step 1. Adjust the latch backset length. Move the square hole in the latch according to the backset length, please keep the square hole horizontal during the movement. 2-3/8"(60) 2-3/4"(70) please keep the square hole horizontal during the movement Step 2.
1.2 Installing the batteries Remove the battery cover, and install 2*AAA Alkaline batteries. Please do not reverse the positive and negative stages during installation. 1.3 Installing the Lock Step 1. Install the front lever. Place the connecting bolts on the front lever, and plug the spindle in the front lever.
Page 12
Please make sure the steel ball on the spindle is aligned with the hole in the square hole. Step 2. Install the back lever. Secure the back lever with the screws, and affix the rubber plugs on the screws. P.S. Please adjust the front and back lever on a horizonal level.
NOTE: Please test the lock after the installation. If it's too tight to open, it means that the front and back lever did not maintain horizontal, long-term use may be deformed and resulting in failure to open. Please adjust the front and back lever in the same horizontal line.
Search and download YEEUU in App Store (iOS) and Google Play (Android). Step 2 Sign in to your existing YEEUU account, or create an account by choosing Register. Step 3 Turn on the Bluetooth on your smart phone, stay near the lock (within 10 feet / 3 meters) .
Page 15
+ button on the top right-hand corner (Make sure R2 is in Factory Default Mode). Step 3. Choose Add Manually or Auto Scan, select YEEUU H1 Wi-Fi Bridge. Step 4. Click and enter the H1 Wi-Fi Bridge, tap Add Device.
Page 16
2.4 Connect to Amazon Alexa Please make sure you have added the YEEUU H1 Wi-Fi Bridge to the YEEUU App. Step 1. Click Skills&Games in the menu, and then search Smart Life. Select Smart Life in the search result and click ENABLE to enable Skill.
Page 17
During registration, place your finger at the center with the same gesture. In case of low recognition rate, please register the fingerprint again. 2.7 Acceess Card Using Precautions When using access card, please place the access card at the card identification area. 2.8 Unlock Status PLEASE NOTE: After turn on the unlock status, the lock will...
Need help?
Do you have a question about the R250 and is the answer not in the manual?
Questions and answers