Vasco Digipass Manual

GETTING STARTED

Before you begin
This document is written with the assumption that you have already received:

• a Digipass
• a valid PIN number for the Digipass
• a valid username

Critical security precautions

• Never leave your Digipass lying around when you are not present.
• When you leave your computer, even for a short time, close all browser windows.
• If your Digipass is lost, stolen or damaged please immediately notify.

Digipass activation
Before using your Digipass to log on for the first time, you should activate it by following this step-by-step instruction.

1. Press the button
   • The Digipass switches on.
2. Enter the initial PIN supplied to you.
3. Enter a new PIN (5 digits)
4. Enter the new PIN again
   • The Digipass is activated and ready for use.
   • The next time you swith the Digipass on you should use the new PIN.

LOGON

1. open Internet Explorer and go to www.kbcfi.com
2. click 'login' on the right hand side
   
3. click the tab 'Digipass' and enter your 'Username'
   
4. press the button to turn on your Digipass
5. enter your personal 5-digit PIN
6. read your 'response' and enter it in the Password field
7. press Login: you wil be redirected to the page with the authorized application(s) for your user

TROUBLESHOOTING

In case of loss, theft, breach of confidentiality or any risk of misuse of your Digipass, it is required that you send an e-mail to ebc.desk@kbc.be identifying yourself by at least company name, user name and the serial number of your Digipass: see backside near the barcode.