Advertisement
Quick Links
Advertisement
Related Manuals for Techalogic XV-2
Summary of Contents for Techalogic XV-2
- Page 1 XV-2 User’s manual Dual cam helmet camera V1.0 Product Specification...
-
Page 2: Product Features
Sensor SONY IMX307 Aperture F1.8 Lens Angle Front: 140° Rear: 140° Photo JPEG Video Resolution QHD 2560 X 1440P 30fps FHD 1920 X 1080P 30fps Waterproof IP65 Battery 1500 mAh Note：2-3 hours working time at full charge. Size / Weight D32.8 x 112mm / 98.5g Memory card TF card Max. - Page 3 ❶ Power button ❷ WIFI indicator (blue light) ❸ Recording button ❹ WIFI button ❺ Reset ❻ TF card slot ❼ USB charging port ❽ MIC Key buttons commands...
- Page 4 1. To power on / off: Press and hold the ❶power button for 3 seconds, and the camera will vibrate. 2. To start / stop recording: Short press the ❸recording button ONCE. 3. To turn the WIFI on / off: (First, stop recording.) Short press the ❹WIFI button TWICE. 4.
- Page 5 1. When the camera does not detect any motion for 3 minutes, it will automatically turn off. 2. When an external power supply is connected, the energy-saving system will be disabled. 3. This feature can be turned on/off in the APP's setting page. Insert the TF card 1.
- Page 6 3. Once the camera is turned on, the recording light (green light) remains on (meaning, it's not recording), then it will automatically start recording. The green light will flash during recording. To STOP recording, press the ❸recording button. The camera will vibrate once, and the green light will remain on (not flashing).
- Page 7 Use the APP via WIFI 1. Download the LOOKING CAM APP. 2. After turning on the camera, press the ❹WIFI button TWICE to turn on its WIFI. Once the WIFI is on, the blue WIFI indicator light will flash. Note: If the camera is not connected to the phone within 1 minute, the camera's WIFI will automatically turn off.
-
Page 8: Common Questions
5. If successful, you'll see the camera in the LOOKING CAM app. Click ACCESS CAMERA, you can now use the app to control the camera, start / stop recording, take photos, view and download your videos, and more. 6. When the camera is connected to the APP (blue light is ON but NOT flashing), all operation (such as start / stop recording) should be done through the APP because the key button on the camera will be disabled. - Page 9 energy saving detection feature. If the camera detects no movement for 3 minutes, it will automatically turn off to save power. Q4: Updating the Firmware of the camera. A: If a new firmware is available, (1) you can download it from our website or (2) you can update the firmware through the LOOKING CAM APP.
- Page 10 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the XV-2 and is the answer not in the manual?
Questions and answers