Page 2
INSTALLATION INSTRUCTIONS VOLT Bungee Style Tree Strap Mounting Hub ® VAC-SM9-BBZ Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Product Dimensions 2.85” 2.3” 3.95” Remove Mount Top Twist and remove the mount top from the base. Mount Top Mount Base customersupport@voltlighting.com • 813.978.3700 - 3 -...
Page 4
INSTALLATION INSTRUCTIONS VOLT Bungee Style Tree Strap Mounting Hub ® VAC-SM9-BBZ Install Mount Top to Fixture Pass the supply wires from the Fixture Wires fixture through the mount top. Then thread the mount top onto the fixture and hand tighten until snug.
Page 5
Bulb Installation Wire Connections First, connect the wires from the Terminal Block fixture on the mount top. Use the following method. Separate the end of the wire. Open one of the clips on a Clip terminal block and insert one end of the wire.
Page 6
INSTALLATION INSTRUCTIONS VOLT Bungee Style Tree Strap Mounting Hub ® VAC-SM9-BBZ Attach Fixture to Tree Place the wire in the wire exit slot making sure it is facing Hole down. Then attach the mount Bolt Bungee Strap to your desired tree. Wrap...
Need help?
Do you have a question about the VAC-SM9-BBZ and is the answer not in the manual?
Questions and answers