Page 1
ASSEMBLY and INSTALLATION INSTRUCTIONS Duct Transition Kit Part No. 24115 View these instructions online at www.lbwhite.com Kit Contents: Tools required: -- Standard screwdriver, or Description Quantity -- 5/16 Nut driver Instructions Chain 8 ft. Duct Adapter w/ Tabs Duct Clamps Duct, 18 in.
Page 2
Duct Transition Kit FIG.2 2. Pull the inlet end of the infl atale duct over the fl ex duct. See Fig. 2 FIG.3 3. Attach the two ducts to the ring using the duct clamp by saddle the clamp over a coil on the duct.
Page 3
Duct Transition Kit FIG.5 5. Fit one end of the remaining fl ex duct over the ring and secure it using a duct clamp. Tighten the clamp securely. See Fig. 5. 6. Attach the duct adapter with tabs to the end of the duct and secure it with the remaining duct clamp.
Page 4
Service Contact your local L.B. White dealer for replacement parts and service. You may also call the L.B. White Company, LLC at U.S. & Canada: 1-800-345-7200, Overseas: 001-608-783-5691 assistance, or email us at customerservice@lbwhite.com. Be sure that you have your heater model number and confi...
Need help?
Do you have a question about the 24115 and is the answer not in the manual?
Questions and answers