Wen 20136BT Instruction Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Impact Driver
  5. 20136BT
  6. Instruction manual
Wen 20136BT Instruction Manual

Wen 20136BT Instruction Manual

20v max brushless impact driver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL 20136, 20136BT
20V MAX BRUSHLESS
IMPACT DRIVER
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-847-429-9263 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20136BT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wen 20136BT

Summary of Contents for Wen 20136BT

  • Page 1 1-847-429-9263 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    40-Piece 1/4-Inch Hex Shank Impact-Rated Quick-Release Screwdriver and Drill Bit Set (Model DB1440) WEN plans to continue to add more items to our 20V line. For an up-to-date list of the 20V cordless tools compatible with the included battery and charger, visit wenproducts.com.

  • Page 3: Welcome

    INTRODUCTION Thanks for purchasing the WEN Impact Driver. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool.

  • Page 4: Safety

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 5: California Proposition 65 Warning

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Impact Driver Safety Warnings

    IMPACT DRIVER SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. IMPACT DRIVER SAFETY 6. Securing the Workpiece. Secure loose workpieces using vises or clamps to prevent wobble, damage to the 1.Work Environment.

  • Page 7: Electrical Information

    ELECTRICAL INFORMATION (CHARGER) DOUBLE-INSULATED CHARGER The charger’s electrical system is double-insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double-insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal components with protecting insulation.

  • Page 8: Battery & Charger Safety Warnings

    Never carry the charger by its cord or yank it by the cord battery chemicals. If the battery or charger are damaged, to disconnect it from the receptacle. Keep the cord away call WEN customer service at 1-847-429-9263 for as- from heat, oil and sharp edges. Make sure the cord will sistance.

  • Page 9: About The Battery

    BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time. 2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently. 3.

  • Page 10: Before Operating

    If any part is missing or broken, please contact customer service at 1-847-429-9263 (M-F 8-5 CST), or email techsupport@wenproducts.com. PACKING LIST Components Impact Driver Accessories *20V Battery (1) *20V Charger (1) *NOTE: Battery and charger only included with model 20136. 20136BT does not include a battery or charger.

  • Page 11: Know Your Impact Driver

    TOOL PURPOSE Easily drive long deck screws or carriage bolts with your WEN Impact Driver. Refer to the following diagrams to become familiarized with all the parts and controls of your impact driver. The components will be referred to later in the manual for assembly and operation instructions.

  • Page 12: Charging The Battery Pack

    OPERATION WARNING! To avoid injury from accidental startups, be sure that the tool is switched OFF and the battery is removed from the tool before inspecting the unit, making adjustments, or changing accessories. CHARGING THE BATTERY PACK The 20V battery pack for this tool is supplied in a low charge condition to prevent possible problems, and must be charged completely before you use the tool for the first time.

  • Page 13: Installing An Accessory

    OPERATION WARNING! To avoid injury from accidental startups, be sure that the tool is switched OFF and the battery is removed from the tool before inspecting the unit, making adjustments, or changing accessories. WARNING! Only use accessories rated for impact use. Use of accessories that are not rated for impact use could pose a safety hazard.

  • Page 14: General Operation

    OPERATION GENERAL OPERATION 1. Hold the tool with both hands, keeping one hand on the handle and the other hand on the housing. 2. Use the direction selector switch (Fig. 1.1 - 1.3) to select the direction of rotation. Push the switch to the right for counterclockwise rotation and to the left for clockwise rotation.

  • Page 15: Maintenance

    WARNING! Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.

  • Page 16: Troubleshooting Guide

    TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-847-429-9263, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE SOLUTION...

  • Page 17: Exploded View & Parts List

    EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
  • Page 18 EXPLODED VIEW & PARTS LIST Part No. Description Qty. Part No. Description Qty. Self-tapping Screw, Anvil and Chuck As- 20136-001 20108-021 ST3x13 sembly Phillips-head Screw, 20108-024 Nylon Washer 20136-002 M4x14 20108-025 Front Housing 20121B-001 Belt Clip 20108-026 Rubber Cover 49135-017 Wrist Strap 20136-027 Chuck Sleeve...

  • Page 19: Warranty Statement

    (2) years from date of purchase or 500 hours of use; whichever comes first. Ninety days for all WEN products if the tool is used for pro- fessional or commercial use.
  • Page 20 THANKS FOR REMEMBERING V. 2025.01.07...

This manual is also suitable for:

20136

Table of Contents