Table of Contents
Advertisement
Quick Links
E190351
For replacement parts visit
WENPRODUCTS.COM
Your new tool has been engineered and manufactured to WEN's highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
IMPACT WRENCH
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
ELECTRIC
Model # 48107
(M-F 8AM-5PM CST)
bit.ly/wenvideo
Advertisement
Table of Contents
Related Manuals for Wen 48107
Summary of Contents for Wen 48107
- Page 1 WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
-
Page 2: Table Of Contents
Know Your Impact Wrench Operation Maintenance Troubleshooting Exploded View & Parts List Warranty Statement PRODUCT SPECIFICATIONS Model Number: 48107 Motor: AC 120V, 60 Hz, 7.5A, 2100 RPM Impact Frequency: 2700 impacts per minute Maximum Torque: 230 ft. lbs Drive Size: 1/2 in. -
Page 3: Safety Introduction
SAFETY INTRODUCTION Thanks for purchasing the WEN Impact Wrench. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions. Safe operation of this tool requires that you read and understand this operator’s manual and all labels affixed to the tool. -
Page 4: General Safety Rules
GENERAL SAFETY RULES Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and serious injury. Save all warnings and instructions for future refer- ence. The term “power tool” in the warnings refers to your mains-operated (corded) power tool. WORK AREA SAFETY a) Keep work area clean and well lit. - Page 5 GENERAL SAFETY RULES f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
-
Page 6: Impact Wrench Safety Rules
IMPACT WRENCH SAFETY RULES WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury. 1. WORK ENVIRONMENT. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk of electrical shock. -
Page 7: Electrical Information
ELECTRICAL INFORMATION DOUBLE-INSULATED TOOLS Your impact wrench electrical system is double insulated where two systems of insulation are pro- vided. This eliminates the need for the usual three-wire grounded power cord. Double insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. -
Page 8: Know Your Impact Wrench
KNOW YOUR IMPACT WRENCH Carefully unpack the tool from the packaging. Check all components and compare against the diagram below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. -
Page 9: Operation
OPERATION WARNING: To prevent serious injury, make sure all the warnings and instructions have been read and understood before operating this tool. WORK AREA AND WORKPIECE SET UP 1. Designate a work area that is clean and well-lit, away from possible hazards. 2. -
Page 10: Maintenance
To maintain maximum efficiency of the motor, we recommend inspecting the two carbon brushes every 60 hours of operation or when the tool stops working. NOTE: Replacement carbon brushes (Part No. 48107-022) can be or- Carbon Brush dered at wenproducts.com. Only genuine WEN replacement brushes Cover designed specifically for your tool should be used. -
Page 11: Troubleshooting
Inspect and replace carbon brushes as needed (see page Carbon brushes (Part No. 10) Replacement brushes (48107-022) can be ordered 48107-022) are worn. from wenproducts.com Defective motor or other inter- Stop using the tool and contact customer service at (800) nal damage. -
Page 12: Exploded View & Parts List
EXPLODED VIEW & PARTS LIST... -
Page 13: Warranty Statement
Description Qty. Washer 48107-001 Plastic Sleeve 48107-009 Ø17xØ8x1mm 48107-002 Screw ST5x45 48107-010 Gear Assembly 48107-003 Head Housing Assembly Needle Bearing 10.1 48107-010.1 48107-003.1 Head Housing Ø12xØ8x10 48107-003.2 Sealing Ring 10.2 48107-010.2 Gear Sliding Bearing 48107-011 Washer Ø8.4xØ16x0.5 48107-003.3 Ø32xØ19x21 48107-012... - Page 14 LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
- Page 16 THANKS FOR REMEMBERING...
Need help?
Do you have a question about the 48107 and is the answer not in the manual?
Questions and answers