grado GW100 Manual

Overview

Power

Long Press: Power On / Off

Battery Saver: If unpaired for 10 minutes, GW100 will power off.

Blue: Fully Charged

Blue: Powered On


Red: Charging

Red: Low Battery

Charging: Plug the Micro USB cable into the charging port and connect the other end to a compatible USB port of a computer or wall charger.

Connect

Long Press: From the off state press and hold until charging light flashes blue and red.

On your device, navigate to settings and turn on Bluetooth.

After a few seconds, you will see "Grado GW100". Tap to pair.

When the paired device's Bluetooth is turned off or out of range, the GW100 can connect to a second device.

Blue & Red: Ready to Pair

Volume / Music

Short Press: Play / Pause

Short Press: Increase Volume
Long Press: Next Song

Short Press: Decrease Volume
Long Press: Previous Song

Phone / Voice

Short Press: Answer / Hang Up
Long Press: Reject Call
Double Press: Voice Assistant

Short Press: Increase Volume

Short Press: Decrease Volume

Specifications

Bluetooth Version: 4.2 with apt-X

Working Distance: 10m

Battery Life: 15 hours*

Charging Time: 2 hours

Frequency Response: 20Hz~20KHz

Mic Sensitivity: 42dB +/- 3dB

Battery Capacity: 320mAH

Methods of pairing to Bluetooth may vary depending on the specific device. Please refer to the device's manual for further details. *Battery life will vary depending on the listening volume and genre of music played.