Table of contents Charge case overview Charge headset Recharge the case Load software Update your Poly device Locate the serial number on your charge case Support...
Charge case overview Use the charge case to charge and store your headset. The LEDs display the case and headset battery status. Charge case overview...
Charge headset A fully charged case can recharge your headset fully two times for an additional 14 hours of headset talk time. Place your headset inside the charge case or connect it to the charge port on the top of the case. Your charge case LEDs blink every 10 seconds when charging and turn off when fully charged.
Recharge the case Recharge the charge case with the provided USB-C charge cable. Alternatively, recharge using a third-party Qi certified wireless charger (not included). Insert the USB-C charge cable into the charge case and connect to a computer or USB charging device. TIP: For fastest charging, plug your charge case into a power outlet.
Load software Download the Poly Lens app to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer or end a call and mute) functionality. NOTE: Administrative privileges may be required to download the desktop application.
Locate the serial number on your charge case Find the serial number on the inside of the charge case lid. The serial number is located on the inside of the charge case lid. ■ Open the charge case to find the serial number SN: XXXXXX (typically 6 digits). SN: XXXXXX TIP: Take a photo with your smartphone for a better view of the serial number.
Support NEED MORE HELP? support.hp.com/poly HP Inc. 1501 Page Mill Road Palo Alto, CA 94304, U.S.A. 650-857-1501 HP REG 23010, 08028 Barcelona, Spain HP Inc UK Ltd Regulatory Enquiries, Earley West 300 Thames Valley Park Drive Reading, RG6 1PT United Kingdom 台灣惠普資訊科技股份有限公司...
Need help?
Do you have a question about the Voyager Legend 50 and is the answer not in the manual?
Questions and answers