Advertisement
Quick Links
Advertisement
Related Manuals for Roca ONA
Summary of Contents for Roca ONA
- Page 1 INSTALLATION INSTRUCTIONS...
- Page 2 Unpack your product, check for any damage that may have occurred during transit and ensure that there are no missing components. Contact Reece customer service within 48 hours to report any damage or missing components. Please note: fixing bolts/screws are not supplied for installation. Wall hung vanities and basins must be securely attached to wall studs.
- Page 3 Factor in the thickness of the basin and mark the desired height of the vanity. Mark the vertical support beam locations. Note: Vanity must attach to a minimum of two support beams. However, we recommend securing the vanity to the wall in four locations. Remove all drawers or doors and mark the location of all pipes and services.
-
Page 4: Drawer Adjustments
DRAWER ADJUSTMENTS REMOVING DRAWER INSERTING DRAWER 5. Push the drawer back in so that the runners 1. Pull drawer runners out 3. Push drawer in softly engage properly - you will hear a 'click'. You 2. Place drawer on runners 4. -
Page 5: Door Adjustments
DOOR ADJUSTMENTS SIDE ADJUSTMENT DEPTH ADJUSTMENT HEIGHT ADJUSTMENT Loosen the top and bottom screws on the hinge mounting plate and Adjust the screw closest to the door Adjust the screw further away from adjust the door height to desired to move the door left or right relative the door to move the door closer or location.
Need help?
Do you have a question about the ONA and is the answer not in the manual?
Questions and answers