Linksys WRT350N - Wireless-N Gigabit Router User Manual page 14

Chapter 3
PSK-Enterprise
Security Mode > PSK-Enterprise
This option features PSK used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Encryption. Select the algorithm(s) you want to use,
TKIP or AES. (AES is a stronger encryption method than
TKIP.)
RADIUS Server. Enter the IP address of your RADIUS
server.
RADIUS Port. Enter the port number of your RADIUS
server.
Shared Key.
Enter the key shared by the Router and
RADIUS server.
Key Renewal. Enter the Key Renewal period, which tells
the Router how often it should change encryption keys.
When you have finished making changes to this screen,
click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
For more information, click Help.
PSK2-Enterprise
Security Mode > PSK2-Enterprise
This option features PSK2 used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Encryption. Select the algorithm(s) you want to use, AES
or TKIP. (AES is a stronger encryption method than TKIP.)
Wireless-N Gigabit Router with Storage Link
Advanced Configuration
RADIUS Server. Enter the IP address of your RADIUS
server.
RADIUS Port.
Enter the port number of your RADIUS
server.
Shared Key Enter the key shared between the Router
and the server.
Key Renewal
Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys.
When you have finished making changes to this screen,
click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
For more information, click Help.
RADIUS
Security Mode > RADIUS
IMPORTANT: If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or
else your wireless network will not function
properly.
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
RADIUS Server
Enter the IP Address of the RADIUS
server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key
Enter the key shared between the Router
and the server.
Encryption Select the appropriate level of encryption,
40/64-bit (10 hex digits) or 128-bit (26 hex digits),
which is stronger encryption than 40/64 bit encryption.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
11