How To Configure Static Routes - NETGEAR DG834G - 54 Mbps Wireless ADSL Firewall Router Reference Manual

Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
In this example:
• The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
• The Router IP Address fields specifies that all traffic for these addresses should be forwarded
to the ISDN router at 192.168.0.100.
• A Metric value of 1 will work since the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is a
direct connection so it is set to 1.
• Private is selected only as a precautionary security measure in case RIP is activated.

How to Configure Static Routes

Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
1.
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
From the Main Menu of the browser interface, under Advanced, click Static Routes to view
2.
the Static Routes menu, shown in
Figure 7-4: Static Routes Table
To add or edit a Static Route:
3.
Click the Edit button to open the Edit Menu, shown in
a.
7-10
Figure 7-4.
Figure 7-5.
Advanced Configuration