Cisco AIR-AP1121G-E-K9 Hardware Installation Manual page 107

Appendix C Access Point Specifications
Table C-1
Category
Modulation
Data rates
Antenna
Compliance
Safety
Radio Approvals
OL-4309-02
Access Point Specifications (continued)
Specifications
IEEE 802.11b-compliant radio:
Complementary Code Keying (CCK)
IEEE 802.11g-compliant radio:
Orthogonal Frequency Division Multiplex (OFDM)
IEEE 802.11b-compliant radio:
1, 2, 5.5, and 11 Mbps
IEEE 802.11g-compliant radio:
1, 2, 5.5, and 11 Mbps
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
A diversity system with two integrated 2.2 dBi dipole antennas.
The 1100 series access point provides adequate fire resistance and low
smoke-producing characteristics suitable for operation in a building's
environmental air space, such as above suspended ceilings, in accordance with
Section 300-22(C) of the National Electrical Code (NEC) and Sections 2-128,
12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
Caution
Designed to meet:
UL 1950
•
CSA 22.2 No. 950-95
•
• IEC 60950
• EN 60950
IEEE 802.11b-compliant radio:
FCC Part 15.247
Japan ARIB-STD-33B
EN 300.328
IEEE 802.11g-compliant radio:
FCC Parts 15.247, 15.205, 15.209
Canada RSS-210
Japan ARIB-STD-33B
Japan ARIB-STD-66
Europe EN-300.328
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
Cisco Aironet 1100 series power injectors and the universal
power supplies are not tested to UL 2043 and should not be
placed in a building's air-handling spaces, such as above
suspended ceilings.
C-3