Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Quick Start Manual page 39

Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas
Table of Contents

Advertisement

Appendix A
Planning Notes
The AP1010, AP1020, and AP1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access
points with or without external antenna ports are only intended for installation in Environment A as
defined in IEEE 802.3af. All interconnected equipment must be contained within the same building
including the interconnected equipment's associated LAN connections.
For AP1020 and AP1020 Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access points
provided with optional external antenna ports, be sure that all external antennas and their associated
wiring are located entirely indoors. The Cisco Aironet 1000 Series 802.11a/b/g lightweight access
points and their optional external antennas are not suitable for outdoor use.
BE SURE that plenum-mounted Cisco Aironet 1000 Series 802.11a/b/g lightweight access points
are powered using PoE to comply with safety regulations.
Suitable for use in environmental air space in accordance with Section 300.22.C of the National
Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1,
C22.1.
When used below dropped ceiling use a UL Listed ITE power adapter (QQGQ) marked LPS or a
Listed Direct Plug-in Adapter (EPBU) marked Class 2 with output rated 48 V, 0.4 A.
DGT statement for products that operate at both 2.4 GHz band and 5 GHz band:
Warning
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that suitable grounding is
available. Statement 1024
Waarschuwing
Deze apparatuur dient geaard te zijn. De aardingsleiding mag nooit buiten werking worden
gesteld en de apparatuur mag nooit bediend worden zonder dat er een op de juiste wijze
geïnstalleerde aardingsleiding aanwezig is. Neem contact op met de bevoegde instantie voor
elektrische inspecties of met een elektricien als u er niet zeker van bent dat er voor passende
aarding gezorgd is.
Varoitus
Laitteiden on oltava maadoitettuja. Älä koskaan ohita maajohdinta tai käytä laitteita ilman
oikein asennettua maajohdinta. Ota yhteys sähkötarkastusviranomaiseen tai sähköasentajaan,
jos olet epävarma maadoituksen sopivuudesta.
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
A-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap1020Ap1030

Table of Contents