Page 2
RV Accessories LTD. is not responsible or liable in any way for improperly installed SnapPads, even if adjudged negligent. *Trademark is owned by mark owner. SnapPad and its goods are not affiliated with or endorsed by the mark owner. EQ GRAND INSTALLATION INSTRUCTIONS...
Page 3
• If the lip of your SnapPad hasn’t fully engaged around the entire edge of the landing foot, raise your jack and place a shim (small piece of wood no thicker than 1/4”) under the side of the SnapPad that hasn’t engaged. Lower your jack again until that side snaps into place.
Page 4
Use your phone or another person to relay the information between the installer and the person working the controls. • Install each SnapPad individually and visually confirm the reinforced lip has engaged on the complete diameter. It is critical your SnapPad has been installed fully and correctly.
• Installing SnapPad products on bent or damaged leveling systems will result in the voiding of the warranty and can lead to product failure, property damage, injury or death. • Origen is not responsible for any issues arising from the use of our products on non-compatible systems.
Need help?
Do you have a question about the EQ Grand and is the answer not in the manual?
Questions and answers