Advertisement

RV SNAPPAD
EQ ROUND
INSTALLATION INSTRUCTIONS
1-866-923-9538 | INFO RVSNAPPAD.COM | RVSNAPPAD.COM
4E | EQ0SP4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EQ Round and is the answer not in the manual?

Questions and answers

Summary of Contents for SnapPad EQ Round

  • Page 1 RV SNAPPAD EQ ROUND INSTALLATION INSTRUCTIONS 1-866-923-9538 | INFO RVSNAPPAD.COM | RVSNAPPAD.COM 4E | EQ0SP4...
  • Page 2 SnapPad family! Very Important Notes: It is critical that you install the correct SnapPad on the proper foot. Please triple check prior to installing your SnapPads. Permanent damage could result from trying to install on the wrong landing foot, resulting in your warranty being voided.
  • Page 3 You may place your first SnapPad prior to this, however, be careful to not get caught underneath your RV during the lowering process! • Typically one side will level first. Take note which side that is and start there. Install one SnapPad at a time and/or use the manual jack operation if possible. Refer to your owners manual for instructions.
  • Page 4 • Use your phone or another person to relay the information between the installer and the person working the controls. • Install each SnapPad individually and visually confirm the reinforced lip has engaged on the complete diameter. It is critical your SnapPad has been installed fully and correctly.
  • Page 5 RV, trailer, towing or following vehicle) arising from the use or inability to use or install the product. • Use extreme caution when installing and using SnapPad. Origen RV Accessories LTD is not responsible or liable in any way for any indirect or direct injury sustained during installation or future use of the product.

This manual is also suitable for:

Eq0sp4

Table of Contents