Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HAKO Cleanserv VL2-70
Summary of Contents for HAKO Cleanserv VL2-70
-
Page 1: L 2-70
Instruction manual Cleanserv VL2-70 / VL3-70 I (7144.00 / 7145.00) -
Page 2: Introduction
Preface Intended Use Dear Customer, in regards to this manual. The Hako-Model L 2-70 and It is our desire to meet the highest quality For any necessary repair work that needs 3-70 I and its included accesories works standards that you expect with the purchase. -
Page 3: Warranty Notes
Maintenance shall be performed by an ny with regard to the damage and send authorized service center of Hako to keep the damage report to us together with your machine in warranty. Damage not covered by the manufactures... -
Page 4: Table Of Contents
Table of Contents Introduction ............Technical Data........... Preface ..............Intended Use ............Maintenance and Care ......Warranty Notes ............ 4.1 Daily Maintenance ........Delivery of the Machine ........4.2 Weekly Maintenance........4.3 Annual Check..........Safety Information ........4.4 Troubleshooting........... 1.1 Safety and Warning symbols....... 1.2 General Notes .......... -
Page 5: Safety Information
Safety information Safety Information Safety- and Warning Symbols In the instruction manual all sections pertaining to your safety, safety of the device and of the environment are marked with the following symbols: Symbol Damage to... Definition Safety Tips People Safety tips to avoid dangerous situations caused or Things by failing to follow the instructions. -
Page 6: General Notes
Hako experts. If you are unsure ask an authorized • Particular attention should be given Hako-service center or an electrical to the safety instructions. Only with technician with recognized qualifi ca- accurate Knowledge and expertise •... - Page 7 Safety information attention to the people around you, • Be careful, the tank may be especially • Start using the machine only when especially children. heavy after sucking up a lot of liquid you have read the instructions in this •...
-
Page 8: Service Notes
• The replacement of the damaged • Clean the float and inspect it regularly power cord must be authorized by for signs of damage. Replace it when Hako-sales service or by a qualifi ed needed. electrician. • The maintenance and service intervals 1.5 Specific Electrical Hazards... -
Page 9: Environmental Information
• Avoid dangerous situations and be disposed according to the local take precaution by learning about regulations. For futher information the characteristics of the liquids and on treatment and recycling, please substances. contact your Hako-dealer from where you purchased the machine. -
Page 10: Signs On The Machine
WENN DER SCHWIMMERKÖRPER DEN SAUGSTROM UNTERBROCHEN HAT! Model/ Make (illustration 1/2a) Safety Advice (illustration 1/4) Hako GmbH D-23840 Bad Oldesloe Made in Italy Hako-Supervac L 1-15 Herstell-Nr. 714200 Read the Manual 220-240 V~ 50-60 Hz (illustration 1/3) 1100 W 1300 W max. -
Page 11: Operation
Operation Operation L2-70 1 Vacuum assembly 1 Wet tool 2 Switch 2 Dust tool 3 Buckles 3 Carpet tool (optional) 4 Suction inlet 4 Round brush 5 Tank 5 Tube (2 pcs) 6 Exhaust pipe 6 Wand 7 Tipping trolley 7 Flat lance 8 Adaptor 9 Flexible hose... -
Page 12: L3-70 I
Operation L3-70 I 1 Vacuum assembly 1 Wet tool 2 Switch 2 Dust tool 3 Buckles 3 Carpet tool (optional) 4 Suction inlet 4 Round brush 5 Tank 5 Tube (2 pcs) 6 Tipping trolley 6 Wand 7 Flat lance 8 Adaptor 9 Flexible hose... -
Page 13: Dry Suction
Operation Wet Suction • Loosen the locking device on the container and remove the suction fan from the top. • Remove the filter cartridge from the container. • Clean the container, hose and accessories as necessary. • Put the suction fan back onto the container and lock with the locking device. -
Page 14: Discharge System
Operation 2.5 Discharge system: Before draining the tank, use the liquid discharge system for lightening it. ATTENTION: make sure that plug is perfectly fasten and that hose is se- cluded in its seat when using dry and wet & dry vacuum cleaners. -
Page 15: Technical Data
Technical data Technical data 2-70 3-70 l wet/dry wet/dry Tank capacity Rated Voltage V/Hz 220-240/50-60 220-240/50-60 Power rating 2x1100 3x1100 Suction mbar 238-380 Airfl ow, motor 2x56 3x56 Bypass motor Overall height 1010 Width Weight, standard 26,8 Power cord, length Standard accessories NV/mm Ø... - Page 16 Technical Data Circuit diagram L2-70...
- Page 17 Technical Data Circuit diagram L3-70 I...
-
Page 18: Maintenance And Care
Daily and weekly maintenance repair • Remove and clean the fi lter cartridge work can be performed by a specially from the container after dry vacuuming. trained operator, all other Hako system maintanence is only performed by trained qualified personnel. Please 4.2 Weekly Maintenance 4.3 Annual check... -
Page 19: Troubleshooting
Maintenance and Care Troubleshooting Malfunction Reason How to solve Suction assembly does not start Not current Check mains fuse*, power cord plug and outlet Suction assembly stops Thermal amperometric protection Please check the vacuum cleaner dropped for electric motor problem for correct operation by asking for authorized technical service. -
Page 20: Optional Accesories
Dry Suction With Recommended Combinations: Filter Insert (Included) Filter Cartridge (Optional) Paper Filter Bag (Optional) Filter Insert Filter Cartridge Paper Filter Bag The following options are available for the machine. Please contact your Hako dealer or Hako sales and service establishement. -
Page 21: Dry Cleaning
Optional Accessories Filterpatrone for Dry Cleaning L 2-70/ L 3-70 l Assembly: • Bearing the surface on the float • Remove the vacuum housing from housing and clean if necessary. the container • Pull off the protective seal and glue •... - Page 22 Optional Accessories • The install the float with the float housing do so by a slight left turn (counter clockwise.) In addition, if necessary, loosen the three screws slightly. • Put the fi lter cartridge as show on the fl oat housing and fasten with the supplied cover by turning clockwise.
- Page 23 Optional Accessories 5.2 Paper Filter Bag for Dry Cleaning L 2-70 Inserting the Paper Filter Bag • Remove the vacuum housing from Note: The paper fi lter bags can be used the container in conjuction with the fi lter cartridges or •...
-
Page 24: Carpet Nozzle
Optional Accessories 5.3 Paper Filter Bag 5.4 Carpet Nozzle for Dry Cleaning L 3-70 l Inserting the Paper Filter Bag For dry use on carpets or rugs with the paper fi lter bag • Pull the paper filter bag over the suction intake, as shown •... -
Page 25: Ec- Declaration Of Conformity
For the relevant implementation of the Name of the person authorised for Hako GmbH safety and health requirements men- Hako to compile the technical file: Hamburger Straße 209-239 tioned in the Directives, the following D-23843 Bad Oldesloe standard (s) and / or technical specifica- Ludger Lüttel... - Page 26 Spitzentechnik für eine saubere und schönere Umwelt Advanced Technology for a Cleaner, Better Environment · · Hako GmbH Hamburger Str. 209-239 D-23843 Bad Oldesloe · +49 4531 806-0 Fax +49 4531 806-338 ...
Need help?
Do you have a question about the Cleanserv VL2-70 and is the answer not in the manual?
Questions and answers