Related Manuals for SMART-AVI NET-IP-PRO
Summary of Contents for SMART-AVI NET-IP-PRO
- Page 1 ETHERNET/RS232 SERVER CONTROL MOST SMARTAVI MATRIX SWITCHES FROM ANYWHERE IN THE WORLD USER MANUAL...
- Page 2 NET-IP-PRO has been tested with the Chrome and Firefox web-browsers. Internet Explorer is not supported.
-
Page 3: Table Of Contents
What’s in the box ............4 Technical Specifications ..........4 Connecting to the NET-IP-PRO ........5 Initial Setup for NET-IP-PRO ........... 7 Controlling the NET-IP-PRO via HTTP ......9 Matrix Menu ..............9 Device Config Menu ............. 11 Web Based Telnet............12 Controlling the NET-IP-PRO via TELNET ...... -
Page 4: Introduction
SmartAVI switching matrixes to be controlled remotely via HTTP or TELNET. Manage the switching functions of your ma- trix with ease from anywhere in the world. With NET-IP-PRO you can save present input/output configurations for easy access. TELNET access provides transparent command control of your matrix, perfect for use with automated third-party control software. -
Page 5: Connecting To The Net-Ip-Pro
23. An alternative op- tion is to use “detect_gui,” this program will find the IP address of the NET-IP-PRO and then open up a web browser to the NET-IP- PRO web interface. The steps to do this are shown below. - Page 6 6. Open a web browser and navigate to the IP address that is indicated. You will be prompted to enter a username and password. 7. To access the web interface of NET-IP-PRO, log in with the following information: User ID:...
-
Page 7: Initial Setup For Net-Ip-Pro
INITIAL SETUP FOR NET-IP-PRO 1. Once connected to the NET-IP-PRO, you will see the follow- ing menu of options: Administration Device Config Input/Output Select Network Settings Admin Password Update Firmware Web Console Web Telnet ... - Page 8 INITIAL SETUP FOR NET-IP-PRO 3. Connect the NET-IP-PRO to a SmartAVI video matrix using an RS-232 (male-to-male) cable with a null modem adaptor (refer to the figure below): 4. It is also recommended that you set a password for the NET- IP-PRO at this point.
-
Page 9: Controlling The Net-Ip-Pro Via Http
CONTROLLING THE NET-IP-PRO VIA HTTP I. MATRIX MENU Matrix menu allows you to set the cross-points for the ma- trix. Cross-points are used to route signals from the individual inputs to individual outputs. The output channels can only have one input, but each input can have several outputs. - Page 10 CONTROLLING THE NET-IP-PRO VIA HTTP 1. Click on the matrix window to set a crosspoint; set as many crosspoints as needed. This will instantly set the input to the corresponding output as indicated in the matrix. 2. Click on “record this setup as macro”...
-
Page 11: Device Config Menu
CONTROLLING THE NET-IP-PRO VIA HTTP II. DEVICE CONFIG MENU Device Config menu allows you to customize the names of the Input and Output. You can simply assign names to the inputs and outputs by typing the new name in the text field and pressing “Submit Names.”... -
Page 12: Web Based Telnet
III. WEB-BASED TELNET Web Telnet button allows you to send commands to the matrix via a web-based TELNET connection to the NET-IP-PRO through a Java internet application. This application is similar to telnet clients such as HyperTerminal or PuTTy. Use the same username and password from the web interface login. -
Page 13: Controlling The Net-Ip-Pro Via Telnet
NET connection to the NET-IP-PRO. To use this function, use a telnet client such as Hyperterminal or PuTTY to connect to the IP address of the NET-IP-PRO. You will be prompted for a user- name and password - this will be the same as the login infor- mation via HTTP. - Page 14 © 2013 SmartAVI, Inc.
- Page 15 © 2013 SmartAVI, Inc.
-
Page 16: Limited Warranty Statement
NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Need help?
Do you have a question about the NET-IP-PRO and is the answer not in the manual?
Questions and answers