Figure 3-3 Cable Connections Of An Adsl Broadband Network After The Router Is Installed On - Huawei HG231f User Manual

HUAWEI HG231f Wireless-N Router
User Guide
Figure 3-3 Cable connections of an ADSL broadband network after the router is
installed on the network
POWER
RESET
2
1. Router
3. PC
5. Splitter
7. ADSL modem
To install the router on an ADSL broadband network, do as follows:
Step 1
Connect the ADSL modem as described in its user guide.
Step 2
Use a network cable to connect the WAN interface of the router to the Ethernet interface
of the ADSL modem.
Step 3
Use a network cable to connect any of the four LAN interfaces of the router to the
Ethernet interface of a PC.
Step 4
Use the power adapter of the router to connect the POWER interface of the router to a
power socket.
----End
Issue 01 (2010-04-01)
LAN4 LAN3 LAN2 LAN1 WAN
1
3 4
8
MODEM
PHONE LINE
5
2. Power adapter of the router
4. Telephone
6. Telephone line interface on the wall
8. Power adapter of the ADSL modem
3 Hardware Installation
PO W ER
LAN
RESET
AD SL
7
6
3-5