Step 7: Radius Attributes - Cisco 4402 - Wireless LAN Controller Using Manual

Click on "OK", then "Next" and "Apply"
Do this for each Remote Access Policy that is needed.

Step 7: RADIUS attributes

Remote Access Policies may be expanded using RADIUS attributes. The RADIUS attributes can, among other
things, provide the user with access to different VLANs.
Right-click on a Remote Access Policy: for example "Students in VLAN 10", and select "Properties"
Click on "Edit Profile" and select the "Advanced" tab
There are many ways of configuring different RADIUS attributes. The following is a description of what is
needed to assign a user to a different VLAN from that supplied as standard by the access points or controller
unit:
Click on "Add", select "Tunnel-Medium-Type" and click on "Add"
Click on "Add" again and select "802 (Includes all 802 media plus Ethernet canonical format)"
Click on "OK" twice to return and select additional attributes.
Select "Tunnel-Pvt-Group-ID" and click on "Add"
Click on "Add" again and type the name of the VLAN which is to be used, for example "10"
Click on "OK" twice to return and select additional attributes.
Select "Tunnel-Type" and click on "Add"
Click on "Add" again and select "Virtual LANs (VLAN)"
Click on "OK" twice, then click on "Close" in the "Add attribute" window
The list will now look something like the illustration below.
o
45