Product Controller Mobile Communicator Overseas Model YSCRW01 Responsible Party YANMAR CO., LTD. ...
Page 3
3. Statement according to Part 15.21 Changes or modifications made to this equipment not expressly approved by YANMAR CO., LTD. may void the FCC authorization to operate this equipment. 4. Statement according to RF Exposure Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 2 cm between the radiator and your body and at least 20 cm between the radiator and the head of all persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ...
COMPONENTS SYSTEM BLOCK DIAGRAM GSM/UMTS and GPS antenna (Multi Function antenna) GPS GSM/UMTS antenna antenna connector connector COM board Wireless module HC25 MAIN board Power circuit , CPU, etc Interface connector Power supply , CAN , DI・DO ...
Page 6
FIGURE OF THE INSTALLATION *2 *1 Antenna Equipment *1 Minimum distance of 2cm between the antenna and your body. *2 Minimum distance of 20cm between the antenna and your head. Installation of the antenna and this equipment will be different depending on each machine. NOTICE TO INSTALL Do not install this equipment to a place where ‑ it will receive strong vibrations, impacts , direct sunshine and rain. ‑ temperature rises or lowers extremely, or changes rapidly. Put in fuse (MAX 30A) between this equipment and battery.
Page 7
FUNCTION OVERWIEW ABOUT INSTALL This equipment is installed to Products made by YANMAR. Ex) Agriculture, Construction, and Marine Machine, or Engine, etc. FUNCTION GPS Satellite Mobile Communication Remote Center Machine Network (YANMAR) This equipment has some following functions. This equipment can collect the state of the operation machine. get the position by GPS. communicate with the remote center by a mobile communication network. This equipment communicates with the remote center, when the machine operating starts or finishes, or various events occur.
Need help?
Do you have a question about the YSCRW01 and is the answer not in the manual?
Questions and answers