Client Pc Configuration - Compaq CP-2W - iPAQ Connection Point User Manual

Client PC Configuration

Note: If your PC provides Internet access to other computers on your network,
you must uninstall your Internet sharing software now in order for your
Connection Point to be the Internet sharing device.
You may also wish to uninstall the Internet sharing software from other PCs
on the network for consistency and to avoid confusion.
Note: To install the Connection Point CP-2W using an 802.11b wireless PC, the
following are required:
•
The SSID of your client PC should be set to ConnectionPoint. (If you
need help with this, refer to the documentation that came with your
wireless card or adapter.)
• WEP encryption on your client PC should be disabled for the initial
configuration process. (Consult your wireless adapter documentation
for information on how to set this. It is recommended that you
re-enable encryption after initial configuration is completed.)
10 PAQ C P
I ONNECTION OINT
CP-2W