Canon Wireless File Transmitter WFT-E2 II A Instruction Manual page 90

Wireless file transmitter for use with eos-1d mark iv

Hide thumbs Also See for Wireless File Transmitter WFT-E2 II A:

Table of Contents

Connecting GPS Devices via Bluetooth

Detaching Bluetooth units from the USB port

Before detaching Bluetooth units from the USB port, always select [Disconnect] as shown in

step 5. Follow the instructions displayed to terminate the connection.

The connection with the Bluetooth unit will not be terminated if you simply turn off the camera. If

you detach a Bluetooth unit while the connection is still active, attach the Bluetooth unit again

and follow the preceding steps to terminate the connection.

Power Management

If you will not use a wireless or wired LAN at the

same time as the Bluetooth unit, set

[Communication mode] to [Disconnect]. The

camera battery drains faster under settings other

than [Disconnect] because power saving is

disabled.

Table of Contents