Canon Wireless File Transmitter WFT-E2 II A Instruction Manual page 102

Responding to Error Messages
61: Same SSID wireless LAN terminal not found
Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN terminal?
Move the antenna to a position clearly visible from the point of view of the transmitter.
(p.106)
What to check on the transmitter
On the transmitter, does the SSID setting match that of the wireless LAN terminal?
Check the SSID on the wireless LAN terminal, and configure the same SSID on the
transmitter. (p.21)
What to check on the wireless LAN terminal
Is the wireless LAN terminal on?
Turn on the wireless LAN terminal.
When you are using WFT-E2 IID with wireless LAN terminals supporting IEEE
802.11a, are the terminal settings locked on IEEE 802.11a?
Configure the wireless LAN terminal to allow access via IEEE 802.11b and g.
If you are filtering by MAC address, did you register the transmitter's MAC address
on the wireless LAN terminal?
Register the transmitter's MAC address (p.66) on the wireless LAN terminal.
62: No response from wireless LAN terminal
What to check on the transmitter
Is the transmitter configured for communication in infrastructure mode?
Configure the transmitter for communication in ad hoc mode.
What to check on the wireless LAN terminal
Is there a nearby wireless LAN terminal for ad hoc communication?
Prepare a wireless LAN terminal for ad hoc communication near the transmitter.
102