Viking VCWB300RSS Product Brochure page 54

Basic specifications – ice machines
Description
Overall Width
Overall Height
Overall Depth from Rear
Cutout Width
Cutout Height
Cutout Depth
Electrical Requirements
Maximum Amp Usage
Inlet Water Requirements
Drain Requirements
Temperature Requirements
Maximum Storage Capacity
Approximate Shipping Weight
1 5 " W I D E I C E M A C H I N E S
FGIM515
14 7/8" (37.8 cm)
33 7/8" (86.1 cm) minimum to 34 7/8" (88.6 cm) maximum
Without door panel: 22" (55.9 cm)
To front of door panel: 22 3/4" (57.8 cm)
To front of handle: 25 1/4" (64.1 cm)
15" (38.1 cm)
34 1/4" (86.4 cm) minimum to 35 1/4" (89.5 cm) maximum
24" (61.0 cm)
115V/60 Hz; 15 amp dedicated circuit; 6' 3-wire cord attached to product
5.0 amps
1/4" copper tubing inlet waterline; 20 psi minimum to 80 psi maximum
40°F (5°C) minimum to 100°F (38°C) maximum
5/8" ID x 7/8" OD Plastic tubing required
50°F (10°C) minimum to 100°F (38°C) maximum
26 lb. (11.8 kg)
113 lb. (51.2 kg)
54
FPIM515
3/8" ID x 10' Plastic tubing supplied
118 lb. (53.5 kg)