Summary of Contents for La Crosse Technology 616A-56647V2
Page 1
Travel Projection Alarm Clock SET UP GUIDE MODEL: 616A-56647 with USB-C...
Page 2
POWER UP With the cover/stand closed, insert two AAA batteries (not included) into the back of projection alarm. Observe correct polarity. Firmly pull the cover/stand open from the top to view the clock. Optional USB-C power cable (included) for constant, adjustable backlight and projection.
BUTTONS Press to view Alarm Time. ALARM When alarm time is showing press to activate/deactivate alarm. Hold to set Alarm. Press to display Calendar or Alarm Time. MODE/SET Hold to enter Settings Menu. Alarm Sounding: Press to silence alarm for 10 minutes. USB Powered: Press to adjust backlight HI-LOW-OFF SNOOZE/LIGHT Battery Powered: Press for 10 second backlight and projection.
TIME ALARM Set Alarm: Press the ALARM button to view alarm time. While viewing, hold the ALARM button to enter the Alarm Settings. Press and release the ▲UP ▼ DOWN buttons to adjust values. Press the ALARM button to confirm and move to the next item. Alarm Settings Order: •...
CUSTOM DISPLAY MODES Press the MODE/SET button to switch between the Alarm Time and Calendar displays. ADJUSTABLE BACKLIGHT When using USB-C Power: • Press the SNOOZE/LIGHT button to adjust the backlight intensity. • There are 2 brightness levels, plus an off option. When using Battery Power Only: SNOOZE/LIGHT •...
Battery Power: Press the SNOOZE/LIGHT button to view the projection image and backlight for 10 seconds. IMPORTANT: The clock needs to be powered with the included USB-C cable for a constant projection. USB CHARGING PORT Important: The Clock must be connected to USB-C power to charge a mobile device.
For more information go to: www.P65Warnings.ca.gov STAY IN TOUCH! Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, and X (Twitter).
BATTERY INSTRUCTIONS WARRANTY La Crosse Technology, Ltd. provides Battery replacement instruction: When batteries of different brand or a 1-year limited-time warranty on this type are used together, or new and old product relating to manufacturing batteries are used together, some batteries defects in materials &...
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the 616A-56647V2 and is the answer not in the manual?
Questions and answers