Door Swing Reversal - Danby Silhouette Select DBC162BLSST Owner's Manual

Installation Instructions - Door Swing Reversal
Fig 1A
Fig 1C
Fig 1E
1 Bottom hinge (Right)
6 Top hinge (Right)
Decorative Plug
10
1 Open the door 90 degrees and take out the 2 screws from the lower door axis (3),
remove the door refer (Fig. 1A) then pull out the door and door axis (Fig. 1A).
2 Put the door safely aside.
3 Take out 3 screws (8) from top hinge (right) (6) and remove the right top
hinge. (Fig. 1C)
4 Remove decorative plug (10) from left top of cabinet and install spare top
hinge (Left) (9) at left top of cabinet with 3 screws. (Fig. 1D)
5 According to above procedure, install spare lower hinge (left) (11) onto left
lower cabinet. (Fig. 1E)
6 Revolve the door 180 degrees. Install the door the same way it was removed
and fix it with door alignment.
7 Block the hole at right top of cabinet with spare decorative plug.
2 Screws
8 Screws
Bottom hinge (Left)
11
9
Fig 1B
Fig 1D
3 Door axis
Top hinge (Left)
9