Advertisement
Contents
Before usage
Features
Parameters
Dimension figure
Schematic diagram
Installlation
Installation
Usage
Attention
FAQ * After service
FAQ
Packing list
See to the physical product for the appearance, color or pattern.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 Ò
2
2
3
3
4
5
5-6
6
6
1
www.fineprint.cn
After installation, be sure to fill the tank with water before switching on the
power. The receptacle of water heater shall be set to places beyond the water
spraying. Never plug or pull the power plug with wet hand. If the power cord
is damaged, be sure to have it replaced by appointed maintenance.
In cold area, if the water heater is idle for long period in winter, please pull
the safety valve to discharge the water to avoid freezing.
The shell of the water heater is all plastic. To clean the shell, please wipe it
gently with wet cloth and neutral detergent. Do not use petrol or other
solvent.
In case of breakdown, please contact us or the appointed maintenance to
resume normal usage as soon as possible.
FAQ
Phenom enon
Plea se ch ec k
Is water supply failed or water pressure too low?
No water outpu
t
Is water exit blocked? Is hot water valve opened?
Heating indicator is on
Heate r brea kdown
Cold
water
Is the power switched on?
output
Heating indicator is off
only
Is there temperature regulator breakdown?
The set water temperature is not reached yet
The heating indicator keeps on
Is there temperature regulator breakdown?
Unstable quantity and temperature
Is the tap water input pressure stable?
with water output
Packing List
Electri c
Safety
Name
water
valve
heater
1
1
Quantity
H ow t o so lve
Make check
Check and clear
Contact the maintenance
Switch on the power
Contact the maintenance
Continue heating
Contact the maintenance
Make check
User's
Expansion
Gasket
manual
bolt
4
2
1
6
Advertisement
