Advertisement
California Air Tools
5 Gallon Pressure Pot
Model No. 365B
Technical Data
Type of feed..........................................................................................................Pressure
Maximum pressure in the tank........................................................................0,413Mpa (60PSI)
Working pressure in the tank.............................................................0, 034-0,172MPa (5-25PSI)
Air consumption....................................................................................240,691/min (8.5 CFM)
Tank capacity....................................................................................................20 I (5.28 gal)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for California Air Tools 365B
Summary of Contents for California Air Tools 365B
- Page 1 California Air Tools 5 Gallon Pressure Pot Model No. 365B Technical Data Type of feed…………………………………………………………………………………………….Pressure Maximum pressure in the tank…………………………………………………………...…0,413Mpa (60PSI) Working pressure in the tank…………………………………………………….0, 034-0,172MPa (5-25PSI) Air consumption………………………………………………………………………...240,691/min (8.5 CFM) Tank capacity……………………………………………………………………………………..20 I (5.28 gal)
-
Page 2: Important Safety Instructions
Safety Guidelines- Definitions NOTE! Information that you should pay special attention to. DANGER! URGENT SAFTEY INFORMATION A HAZARD THAT WILL CAUSE SERIOUS INJURY OR LOSS OF LIFE CAUTION! Information for preventing damage to equipment WARNING! IMPORTANT SAFETY INFORMATION A HAZARD THAT MIGHT CAUSE SERIOUS INJURY OR LOSS OF LIFE Important Safety Instructions Save These Instructions IMPROPER OPERATION OR MAINTENCE OF THIS PRODUCT COULD RESULT IN SERIOUS... -
Page 3: Important Notes
Assembly Read the instructions carefully Read instructions carefully before using this product. This equipment can be used to supply material up to a maximum of 60 pounds (PSI). This equipment has an agitator, air regulator, pressure gauge, safety valve and outlet for the material. The tank has been coated to last. The agitator allows you to maintain the uniformity of the material before being applied as long as the material is not too heavy. - Page 4 Instructions for using Air Pressure Regulator on Paint Tank Purpose of Pressure Regulator The pressure regulator on the paint pot regulates the amount of pressure applied to the paint in the paint tank. This controls the pressure of the paint being delivered to the spray gun. Recommended Paint Tank Pressure Internal-Mix Guns- Use higher tank pressure up to the full amount of air pressure being delivered to the spray gun but never in excess of 50 lbs.
- Page 5 Maintenance and Storage 1. Close the air flow to the equipment. 2. Release all air pressure in the tank by pulling the safety valve ring until the pressure subsides. 3. Rotate the tank regulator handle “T” counter clockwise until you do not feel any tension in the spring.
-
Page 6: Troubleshooting
Trouble Shooting WARNING: If any of the following symptoms appears during your operating, stop using the tool immediately, or serious personal injury could result. Only a qualified persons or an authorized service center can perform repairs or replacement of tool. Disconnect tool from air supply before attempting repair or adjustment. -
Page 9: Limited Warranty
This warranty does not transfer to subsequent owners. CALIFORNIA AIR TOOLS, Inc. will repair or replace, at its option, any parts that are proven by an authorized service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated above.
Need help?
Do you have a question about the 365B and is the answer not in the manual?
Questions and answers