Download Print this page

Laminex BS Installation Manual

Beam suspended partitioning systems

Advertisement

Quick Links

LAMINEX
PARTITIONING SYSTEMS
®
BS – Beam SuSpended
installation guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the BS and is the answer not in the manual?

Questions and answers

Summary of Contents for Laminex BS

  • Page 1 LAMINEX PARTITIONING SYSTEMS ® BS – Beam SuSpended installation guide...
  • Page 2 STEP 1 Mark out for wall channels to house partitions as per the supplied plan. Assembly Tool Kit Supplied Phillips head screw bit 1/8" drill for 6g screws 5/32" drill for 10g screws Mag nut setter 8mm masonry bit Spanner 8.5mm drill for bolts 5mm Allen key Screws per cubicle...
  • Page 3 Wall Channel "A" Wall Channel "P" Wall Channel "A" STEP 3 Wall Channel "A" Wall Channel "P" Wall Channel "A" Fix channel "A" to back wall by placing Wall Channel "A" on top of the levelled saddles. DO NOT CUT Wall Channel "A"...
  • Page 4 Wall Channel "A" Wall Channel "A" Wall Channel "A" STEP 5 Wall Channel "A" Wall Channel "A" Locate channel "A" to back of frontals. Fit hinges and hardware Wall Channel "A" to the frontals and nibs. Fit hinges and hardware to the doors.
  • Page 5 Wall Channel "A" Wall Channel "A" Wall Channel "A" STEP 7 Wall Channel "A" Wall Channel "A" Take a measurement from wall to Fixed wall. Cut the beam to length. Locate the beam onto the fixed nib, Wall Channel "A" resting on the wall channels "P."...
  • Page 6 Wall Channel "A" Wall Channel "A" Wall Channel "A" STEP 9 Wall Channel "A" Wall Channel "A" Fit the door insert into the underside of the beam. This needs to be hard against the nib. The door insert Wall Channel "A" provides the necessary tolerances for door.
  • Page 7 STEP 11 Fit the last nib into place by pre-drilling and screwing. Plumb the cubicle left to right/ top to bottom across the front of the cubicles. Proceed to pre-drill and screw divisions into position. Remove the support saddles from the underside of cubicles. Fit to the underside of beam the alternative snap-in insert.
  • Page 8 Laminex Partitioning Systems should be protected from strong, direct sunlight as continuous exposure may cause discolouration or fading to the surface. Please obtain a copy of the terms and conditions of the applicable warranties from laminex.com.au. This warranty is in addition to any rights that may exist under the Australian Consumer Law. Laminex®...