Home Accents Holiday 22PG90212 Manual

TM
NEED HELP?
CALL: 1-855-HDHoliday (1-855-434-6543)
Monday - Friday 8am to 7pm EST, Saturday 9am to 6pm EST
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI)
outlet. If one is not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not
a part of the product when in use.
m. The lamps of this product are not replaceable. Do not attempt to
change or modify the lamps.
n. Read and follow all instructions that are on the product or provide with
the product.
SAVE THESE INSTRUCTIONS
o.
Pre-Assembly
Package Contents
Part Description
A Tree top
Tree center, Tag 2
B
Tree bottom, Tag 1
C
D Tree stand
DO NOT RETURN TO STORE.
Quantity
Assembly
Assembling the tree stand
Step 1 . Choose a location near a wall outlet.
Step 2 . Unfold the legs of the tree stand and lay the stand
on the floor.
Step 3 . Slide the locking disk of the tree stand down until it
snaps into place.
Assembling the tree
Step 1. Remove the protective caps from the tree bottom and
insert the pole into the tree stand.
Note:
This may deform the tree stand and may result in an
unbalanced tree.
Step 2. Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Step 4. Connect the light strings as per the color labels indicated
and insert the adapter into the wall outlet. All your lights
should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Top view
Step 6. When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
1
Section 1
1
1
1
Model# 22PG90212
Sku # 1007 578 440
Do not step on the tree stand legs during the setup.
Side view
Tree top
Section 2
Christmas Tree
Insert Red Label
Plugs Into Red
Labeled Extension
Cord
Insert Yellow Label
Plugs Into Yellow
Labeled Extension
Cord
Adapter
To Be Plugged
Into Wall
Outlet