Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Brilix UV SCENIC
Summary of Contents for Brilix UV SCENIC
- Page 1 Low salinity electrolysis, hydrolysis and UV technology UV SCENIC INSTALLATION AND USER GUIDE Worldwide from Portable color remote display (TFT) control 1,5g WIFI and Upgrade Self salt/l MODBUS possible clean VERSION 15/09/2022 / REVISION: 15/02/2023...
-
Page 2: System Installation
Description Water treatment system and a controller for swimming pools. This method water treatment combines electrolysis of low salinity, hydrolysis and UV radiation. With low-salinity electrolysis we produce chlorine gas from water which is slightly salted (from 1.5 to 2.5 g of salt per litre). Hydrolysis produces disinfectants such as oxygen, peroxide, hydroxyls, and ozone. -
Page 3: Maintenance
Initial water adjustments Water adjustments Adding salt to the water Adjust the alkalinity between 80–150 ppm. We recommend to add 1,5 to 2,5 grams of salt (without iodine) for each liter of water in Adjust the pH between 6,8 to 7,2. your swimming pool (1,5 to 2,5 kg NaCl per m water). -
Page 4: Troubleshooting
Functions of the UV System Important safety information: Never look directly into the lamp while the UV light is on. • Do not operate in dry conditions. Do not cover the unit. • Always disconnect the unit from the power supply and cut off the water supply before maintenance. •... - Page 5 Free chlorine levels don’t reach 0,3 ppm Alarm AL3 and pH dosing pump stopped Increase filtration interval. The maximum dosing time (standard 60 min.) • • Increase electrolysis level. is accomplished and the acid dosing pump stops in order to avoid the •...
- Page 6 Electronic box TOTAL TOTAL TOTAL °C POOL POOL POOL CONTROL CONTROL CONTROL Complete Filtration Light control Control of 4 Temperature REDOX- Free chlorine pool control pump control additional control management management management machines Description UV16 Intensity 0-100% Salt concentration From 1,5 g to 2,5 g/l Pool (up to 28ºC) 65 m Pool (+28ºC)
- Page 7 Hydrolysis cell TOTAL TOTAL SELF SAFETY 5000 H POOL POOL CLEAN SENSOR gr/h CONTROL CONTROL Self-cleaning Life time Programmable Transparent Security Cells for all guaranteed polarity change PVC holder sensor pool sizes Description UV 16 Hydrolysis cell 4 Titanium cell plates MONOPOLAR Minimum flow Dimension cell plates 200 x 45 mm...
-
Page 8: Automatic Controls
Automatic controls Description Redox Free chlorine Conductivity Temperature Reference Measuring range 0-12 pH 0-1000 mV 0-10 ppm 0-20,000 MS 0-100°C Measuring precision 0,1 pH 1-3 mV 0,10 ppm 10 MS / 100 MS 1°C Material Ag/AgCl gel Gold disc Copper / gold Stainless steel Transparent Probe holder... - Page 9 Control unit wiring diagram Water treatment system for swimming pools. This installation and user manual is a general guide for all Salt water treatment models supplied by spol. Albixon a.s. Some of the features and settings listed in this guide are valid only for applicable models that support these features or for optional equipment that is not included in the basic package.
-
Page 10: Main Screen
Main screen Button display Heating ON/OFF Water temperature Production automatically reduced to Cover Status of the auxiliar relays the % selected (see display 3.6) Pol 1 Pol 2 Polarity 1 / Polarity 2 Current time Waiting time Flow Filtration stopped due to lack of water fl w 2 5 º... - Page 11 Hydrolysis / electrolysis (according to model) 2.6 Cover: connection 2.1 Hydrolysis/Electrolysis: 2.2 Level: Electrolysis - 2.3 Salinity: 2.4 Boost: Filtration during 2.5 Mode: If the device Programming of hydrolysis Desired production of Measuring gr/l of salt 24h at max intensity. has Free Chlorine and of automatic cover.
-
Page 12: Redox Calibration
pH Calibration Calibration of pH probe: Recommended every Optional pH control month during usage season. Metering and control of Calibration with buffers (buffer solutions pH7 / the pH of the water pH10 / neutral): Follow the instructions in 7 steps that appear in the display (screen corresponds to step 1). -
Page 13: Conductivity Calibration
Conductivity calibration 4.22 4.22 4.23 4.24 Calibration of the Conductivity probe: Recommended Optional Conductivity probe every month during usage season. Metering and control of the 4.23 Calibration with buffer (buffer solution 1413 µS/ 12880 conductivity of the water in µS/ neutral): Follow the instructions in 7 steps that appear in Msiemens. -
Page 14: Heating Mode
Heating mode Timed heating with option of climatization*: This mode acts equally to the automatic mode, but besides it includes the option to work on a relay to control the temperature. The desired temperature is set in this menu, and the system works with a hysteresis of 1 degree (example: the setting temperature is 23° C, the system will activate itself when the temperature goes below 22°... -
Page 15: Auxiliary Relays
Auxiliary relays Auxiliary relays Ground DRY CONTACT It is possible to control up to 4 extra 110-230 V max. 3.15 A auxiliary relays (water features, fountains, automatic irrigation systems, built-in cleaning systems, air pumps for spas, garden lighting, etc.). This menu displays the relays which are still available on your device and allow configuration. - Page 16 Wifi settings 8.15 8.16 8.17 Green LEDs (ON) Connection WIFI module yellow green black 8.15 Internet: Once the WIFI module is connected, restart 8.18 8.19 8.20 8.21 your unit. In the Settings menu will appear the Internet option. 8.16 WIFI: Select WIFI to scan the available networks accessible to the module.
-
Page 17: Flow Switch
Flow switch Optional flow switch It is possible to add an external flow switch to the system. Connect as shown in the image and Mechanic security contact your installer for activation. The titanium cell includes a gas flow sensor, you can combine flow switch. - Page 18 Notes / Hydrolysis - electrolysis low intensity OXILIFE...
- Page 19 Notes Hydrolysis - electrolysis low intensity OXILIFE /...
- Page 20 Thank you for using ALBIXON products ALBIXON export@albixon.com www.ALBIXON.com Note that the photos used in the manual are illustrative only. Printing and typesetting errors reserved.
Need help?
Do you have a question about the UV SCENIC and is the answer not in the manual?
Questions and answers