Fm Stereo Reception - Coby CX-CD376 - 20 Watts CD Stereo System User Manual

PEDESTAL
1.
Holder
2. Fastener
(to hitch on the wall)
SPEAKERS
~IJ~
o
D
b (
I I. Mounting Hole
Hit the pedestal on the wall with cD 3 screw (such as
cD3 xI2BA) X 4 as follow photo, do not may wrong the
bearing,so you can hitch your main unit on the wall if you
need.
Set the function switch to radio
]!
FM
Select FM mode band selector switch. Turn the TUNING
)\
control to select the required station. The FM stereo indicator
light will show a stereo broadcast is being received. Fully
extend the FM antenna and adjust its direction for best FM
reception.
FM STEREO RECEPTION
For reception of a FM stereo broadcast station, Set the AM /
FM /FM ST. Switch to FM ST Position. The FM ST. Will
indicator on the LCD display when a FM STEREO broadcast
is being received.
AM
Select AM on band selector switch. Turn the TUNING control
to select the required station. For operation on AM the set
control a built-in ferrite aerial which is directional. Therefore;
the set should be positioned for the best signal strength.
' )
When Function Outline, the system shows the clock.
Adjusting the clock.
J
I. Press the PROGRAM button to adjust clock when clock display.
2. Press UPIFF button or Down/REW to choosel2H or 24H.
3. Press PROGRAM button to keeps the selection of 12H/24H. and
goes to next clock adjusting mode.
4. Press UPIFF button or Down/REW to select the hour data.
5. Repeat
st~ps
3 and 4 to select the minute data.
6. Press PROGRAM to fixed the clock data.
6 7