Avtech BioSafe Series User Manual

Ultra low temperature freezer

Advertisement

Quick Links

Ultra Low Temperature Freezer
User Manual
BioSafe Series
Version: UTFM-202310
Please read this manual carefully before use.
The appearance of the product is subject to the actual product.
In case of product technology or software upgrade, without prior notice.
Antech Scientific reserves the right of explanation.
© all rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BioSafe Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Avtech BioSafe Series

  • Page 1 Ultra Low Temperature Freezer User Manual BioSafe Series Version: UTFM-202310 ○ Please read this manual carefully before use. ○ The appearance of the product is subject to the actual product. ○ In case of product technology or software upgrade, without prior notice.
  • Page 2 Qingdao Antech Scientific Co., Ltd. No. 182 Haier Road, Qingdao, China +86 532 8789 0321 | info@antechscientific.com | www.antechscientific.com This manual reviews the operation and maintenance of Antech BioSafe series ULT Freezer. This manual covers below models: MDF-86U108 MDF-86C118 MDF-86C458 MDF-86C728 Read before using this equipment.
  • Page 3: Table Of Contents

    Biosafe Series ULT Freezer Manual Contents Safety Precautions ................................. 3 Unpacking ...................................5 Packing List ..................................5 General Recommendations ............................5 a) Temperature Monitoring ..........................5 b) General Usage ..............................5 c) Initial Loading ..............................5 Operating Standards ..............................6 Installation ..................................6 a) Location ................................6 b) Wiring ..................................7...
  • Page 4: Safety Precautions

    Biosafe Series ULT Freezer Manual Safety Precautions In this manual, the following symbols and conventions are use This symbol used alone indicates important operating instructions which reduce the risk of injury or poor performance of the unit. CAUTION: This symbol, in the context of a CAUTION, indicates a potentially hazardous situation which if not avoided could result in minor to moderate injury or damage to the equipment.
  • Page 5 Biosafe Series ULT Freezer Manual Below are important safety precautions that apply to this product: Use this product only in the way described in the product literature and in this manual. Before using it, verify that this product is suitable for its intended use.
  • Page 6: Unpacking

    Biosafe Series ULT Freezer Manual Unpacking At delivery, examine the exterior for physical damage while the carrier’s representative is present. If exterior damage is present, please take pictures of damaged packages and send to the seller. Carefully unpack and inspect the unit and all accessories for damage.
  • Page 7: Operating Standards

    Biosafe Series ULT Freezer Manual Load the freezer one shelf at a time, beginning with the top shelf. After loading each shelf, allow the freezer to recover to the desired set point before loading the next shelf. Repeat this process until the freezer is fully loaded.
  • Page 8: B) Wiring

    Biosafe Series ULT Freezer Manual Wiring CAUTION: Connect the equipment to the correct power source. Incorrect voltage can result in severe damage to the equipment. CAUTION: For personal safety and trouble-free operation, this unit must be properly grounded before it is used. Failure to ground the equipment may cause personal injury or damage to the equipment.
  • Page 9: Opening The Door

    Biosafe Series ULT Freezer Manual CAUTION: When moving the freezer, always grasp cabinet surfaces; never pull the freezer by the latch handle. Opening the Door • Remove the padlock if installed. • Grasp the latch handle and pull it toward yourself until the latch disengages from the cabinet strike.
  • Page 10: G) Installing The Remote Alarm Connector

    Biosafe Series ULT Freezer Manual Installing the Remote Alarm Connector The remote alarm contacts are located on the right side of the freezer. After installing the wiring from the remote alarm to the connector, install the connector to the freezer microboard.
  • Page 11: Interface Of Touch Screen Controller

    Biosafe Series ULT Freezer Manual Interface Touch Screen Controller Home Fig 1. Home page Main information on home page: Top: • Time & date • Product description • Freezer status (heart shape icon, green for correct temperature, red for temperature out of range) •...
  • Page 12: B) Event Logging

    Biosafe Series ULT Freezer Manual Event Logging Press the 2 icon at bottom and see below interface: Fig 2. Event Logging (without USB disk) Fig 3. Event Logging (with USB disk) Download data: • Insert USB drive (USB drive icon shows√) •...
  • Page 13: C) Temperature Curve & Temperature Data Logging

    Biosafe Series ULT Freezer Manual Fig 4. Set period of data logging download • Download finished and take out USB disk. Temperature Curve & Temperature Data Logging Press the 3rd icon at bottom and see below interface: Fig 5. Temperature curve Press button to enter temperature data logging page.
  • Page 14: D) Settings

    Biosafe Series ULT Freezer Manual Fig 6. Temperature data Download data: same with section b). Settings Fig 7. Settings At user’s access, there are 4 icons in Setting Page: • Temperature • Password • Information • Date & Time...
  • Page 15: E) Temperature Setting

    Biosafe Series ULT Freezer Manual Temperature setting Fig 8. Temperafig.8 temperature Settings • Chamber Temp: set temperature • High Temp Offset: set temperature + high temp offset = high temp alarm temp • Low Temp Offset: set temperature - low temp offset = low temp alarm temp •...
  • Page 16: H) Date & Time

    Biosafe Series ULT Freezer Manual Fig 10. Information page You may send picture of information page to service engineer, when needed. Date & Time Fig 11. Date & Time...
  • Page 17: Maintenance And Troubleshooting

    Biosafe Series ULT Freezer Manual Maintenance Troubleshooting WARNING: Unauthorized repair of your freezer will invalidate your warranty. Contact Technical Service at 86-532-8768-0032 for additional information. CAUTION: Maintenance should only be performed by trained personnel. Cleaning the Condenser Filter Clean the condenser filters every two or three months. To clean the filters, complete the...
  • Page 18: Electrical Schematics

    Biosafe Series ULT Freezer Manual Electrical Schematics BioSafe-MINI Fig 12. BioSafe-MINI...
  • Page 19: Warranty

    Biosafe Series ULT Freezer Manual Warranty The Warranty for products covered by this manual is ONE YEAR for whole product parts, THREE YEARS for compressor(s). Period starts THREE months from date your equipment is shipped from our facility. This allows for shipping time so the warranty will go into effect at approximately the same time your equipment is delivered.
  • Page 20 Qingdao Antech Scientific Co., Ltd. Tel: +86 532 87890321 Email: info@antechscientific.com Web: www.antechscientific.com...

Table of Contents