Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Labino APOLLO 3.1
Summary of Contents for Labino APOLLO 3.1
- Page 1 LIGHT METER APOLLO 3.1 OPERATING INSTRUCTION...
-
Page 2: Table Of Contents
2.8 HOLD FUNCTION 2.9 MOUNTING THE LUMINANCE TUBE 3. PAIRING UNITS 4. TECHNICAL INFORMATION 4.1 BATTERIES 4.2 OPERATING CONDITIONS 4.3 RELATIVE SPECTRAL RESPONSE 5. WARRANTY 6. CALIBRATION 7. DECLARATION OF CONFORMITY 8. LABINO AB QUALITY DECLARATION Rev. 01 February 2025... -
Page 3: Introduction
UV-A and white light sensors incorporated. Apollo 3.1 comes either as a single kit or as a double kit. The single kit includes one reader unit and one wireless sensor unit. A double kit includes one reader unit and two wireless sensor units. As only the sensor needs to be sent for calibration, the double kit is a convenient tool so that operations are never disrupted. -
Page 4: Operation
2. OPERATION 2.1 TURNING ON APOLLO a) Turn on the Hand unit by pressing the “Power On” button (see Figure 1). Figure 1. Hand unit Power Screen Hold Peak Arrow Enter Arrow Down b) Turn on the Sensor Unit by pressing the “Power On” button. The LED will flash once to confirm (see Figure 2). -
Page 5: Main Menu
c) The Hand Unit and Sensor Unit will now connect. A progress bar indicates the connection process (see Figure 3). Figure 3. Progress bar – Bluetooth connection d) Once the connection is established, you will see the measuring screen that shows the UV-A intensity in μW/cm²... -
Page 6: Average Reading Function
2.4 AVERAGE READING FUNCTION The average reading function allows integrating over the last 10 or 25 values that are measured by the sensor. a) Select SETTINGS in the main menu. The following submenu opens UV-A: μW/cm VIS: lx LUM: cd/m² LUMSCR: OFF AVERAGE: 10 <<<... -
Page 7: Peak Function
2.7 PEAK FUNCTION After the “Peak” button is pressed while you are on the measuring screen, the Hand Unit shows the largest measured value since the button was pressed. A small triangle can be seen in the display (see Figure 7). To deactivate the peak function, press the “Peak”... -
Page 8: Pairing Units
313 nm shall be less than 10%; d) the relative spectral response at a wavelength of 405 nm shall be less than 2%. Figure 11. Relative spectral response of the Apollo 3.1 UV-A radiometer. -
Page 9: Warranty
Sweden Please be sure to send your package with “door-to-door” delivery and mark export documents with “Return for Repair” if you send the product to Labino. The package will be returned to the sender if it is not sent “door-to-door”. -
Page 10: Calibration
6. CALIBRATION The recommended calibration interval is six months and is done by Labino or a Labino authorized calibration center. All Labino calibration centers can be found online at www.labino.com. Labino AB Fabriksvägen 9B 186 32 Vallentuna Sweden Tel.: +46 (0)883 90 70 ”Scope of 17025... -
Page 11: Labino Ab Quality Declaration
Place of Issue: Fabriksvägen 9B, 186 32 Vallentuna, Sweden Date Issued: 21 February 2025 8. LABINO AB QUALITY DECLARATION Labino Quality Management Systems: Labino is certified in accordance with the following standards: STANDARDS CERTIFYING BODY REGARDING ISO 9001:2015 DNV, Sweden...
Need help?
Do you have a question about the APOLLO 3.1 and is the answer not in the manual?
Questions and answers