Page 2
This manual covers below models: MPR-68 MPR-136 MPR-260 MPR-360 MPR-525 MPR-656 MPR-1006 MPR-1410 Read before using this equipment. This product is intended for use by trained personnel only. All service and maintenance should be performed by Antech or authorized Antech representatives. - 1 -...
PharmaSafe Series Pharmacy Refrigerator Manual Application The ANTECH brand PharmaSafe series pharmacy refrigerators are developed to be used by laboratories, hospitals, and pharmacies, ensure optimal storage conditions for temperature sensitive medical products and biological material. WARNING: These refrigerators are not suitable store flammable or hazardous materials.
REQUIRED: Decontaminate parts prior to sending for service or repair. Contact Antech or Antech authorized distributor for decontamination instructions.
PharmaSafe Series Pharmacy Refrigerator Manual 3. Location The refrigerator is in door use, it should be installed in dry and sufficiently ventilated room. Ambient temperature is +16°C and +32°C, optimal ambient temperature is 16°C ~25°C. Humidity should be less than 70% RH.
PharmaSafe Series Pharmacy Refrigerator Manual refrigerating system is operating smoothly and it takes 1~2 hours for refrigerator cooling down to the set temperature. 5) Before put the storing products into refrigerators, make sure the unit is stable working at set temperature.
PharmaSafe Series Pharmacy Refrigerator Manual Indicator screen Door open WIFI Defrosting Key lock Door Power failure Printer Cooling heating Mute Electricity RS485 2. USB function/Data output Automatic output: when the U disk is inserted into the USB port, the buzzer works once, displaying "on", and the PDF files in the U disk are generated during the month and the last...
PharmaSafe Series Pharmacy Refrigerator Manual will be not stored and return to normal display. C. User’s parameter adjustment steps: Under unlock condition, 1) Press Set key for 5 seconds, it will “000”; 2) Press Up key or Down key to scroll the value to input password”099”;...
1~30 Set door open alarm delay time CAUTION: There are also other management menu parameter, never adjust them if you are without permission or no authorization by Antech or Antech authorized distributor. Maintenance and Service Warning: In order to prevent people from getting electric shock or injury, please...
PharmaSafe Series Pharmacy Refrigerator Manual Note: Do not use abrasive cleaners! Do not use sharp objects! To ensure efficient operation, the back and bottom of the refrigerator should be cleaned thoroughly. Use mild soapy water to clean the door seal.
Page 12
PharmaSafe Series Pharmacy Refrigerator Manual 7.2 Battery replacement and recovery Turn off the power switch and pull out the power plug from the outlet; Remove the screws on the electrical box with a screwdriver. (Note: There are high-voltage electrical components in the electrical box, therefore before opening, turn off the power supply, unplug the power plug and turn off the power lock switch of the refrigerator, and the electrical box can only be opened by qualified engineers for maintenance personnel).
PharmaSafe Series Pharmacy Refrigerator Manual Troubleshooting and Maintenance Services Any product may fail. Please observe the operation of equipment in time during use, if there is any abnormality, please check and handle it according to the following table first, If the abnormality can't be changed, please inform our service center or local distributor in time, and we will serve you wholeheartedly to avoid losses.
Please check the connection between the two boards. If it is no problem, replace display board. Notices: If there are other alarm code such as E1, E2...E5, please contact Antech or the Antech authorized distributors for service.
During the first year of the warranty period, component parts proven to be non-conforming in materials or workmanship will be provided by Antech free of charge (international transportation fee is covered by buyer). Installation and calibration are not covered by this warranty agreement. The Technical Services Department must be contacted for warranty determination and direction prior to any work being performed.
Need help?
Do you have a question about the PharmaSafe Series and is the answer not in the manual?
Questions and answers