Related Manuals for Antech MRF-288
Summary of Contents for Antech MRF-288
- Page 1 Qingdao Antech Scientific CO., LTD. OPERATION MANUAL Add: No. 31 Haier road, Qingdao, China. Tel: +86 532 8789 0321...
- Page 3 Content 10.1 10.2 10.3...
- Page 4 Operation Instruction...
-
Page 5: Safety Notices
2 . Safety Notices For the first time to use this device, uses must read the meaning of the following warning labels very carefully. Items and procedures are described so that you can use this unit correctly and safely. If the precautions advised are followed, this will prevent possible injury to the user and any other person. - Page 6 Any such work carried out by anunauthorized person may result in fire or injury due to a malfunction. Antech will be no responsible for such work. Never store volatile or flammable substances in this unit. This may cause explosion or fire.Never store corrosive substances in this unit.
-
Page 8: Installation Site
Before you put the items to the combined refrigerator & freezer please make sure whether the temperature in the refrigerator/freezer has reached the set temperature and then put the items to the refrigerator/freezer in batches. No more than 1/3 of the refrigerator/freezer rating volume per time, in case the temperature rises too much. Combined refrigerator &... - Page 10 5. Components and Overview （ ） Glass windows Door lock Handle Handle Cabinet Door lock Adjustable foot Movable casters -288/288A chamber...
- Page 11 6. Display p anel function description 450 ); In set state, it displays different prompt characters (see below for details); sounds an alarm, the window indicating “door”. c. Fault indicator: When the product is running normally, the indicator light is off; when abnormal operation is running, the indicator light is on.
- Page 12 Press D. Parameter display...
- Page 13 Hardware version Software version 0~10 Refrigerator temperature setting high temperature alarm display H01 temperature alarm display L01 Freezer temperature setting 288/450: 1 ~ 26 88A/450A -10~-40 high temperature alarm display H02 temperature alarm display L02 Mode 1: The door is opened and closed once, the machine is heated once for 5min (the time can be set).
-
Page 14: Printer Settings
Printer Settings: ) Automatic printing: When the printing interval Pt is not 0, the printer will print the current data every Pt minute. Note: when the print interval Pt is less than the record interval SCy, print according to the record interval;The remaining print intervals are printed at integer multiples of the record interval SCy, i.e., the print interval Pt shall set the integer multiples of the bit record interval. - Page 15 7 . Defrost ● Unused ● Maintenance Caution For personal safety, please cut the power supply before any maintenance! Don't inhale medications or aerosols around the device while maintaining a or it will endanger your health. .1 Defrost a combined refrigerator and freezer combined refrigerator and freezer Power on, power on cooling.
-
Page 16: After-Sale Service
8. After-sale Service Any product has the possibility of failure. Please observe the operation of the Combined refrigerator and freezer in the process of use. If there is any abnormality, please check and compare the errors with the following table.If you can't fix the issue, Please inform our service center in time. -
Page 17: Specifications
9 .Specifications Name Model Condenser Compressor Thermostat Microprocessor Temperature sensor High low temperature alarm, door ajar alarm, power failure alarm, low battery alarm, sensor error alarm. Annex1：Rechargeable Battery Maintenance,Installation,Replacement and Disposal Long term power failure or in the process of transportation, the main power switch must be turned off. Otherwise, long time discharge will cause battery loss or permanent damage, and it will be abnormal after re-energized. - Page 19 Anex4: Remote alarm terminal and RS485 interface The remote alarm terminal is installed in the back of equipment and the alarm signal is output by the terminal.The terminal bearing capacity is DC 30V, 2A. Remote alarm terminal...
- Page 20 1 0. Performance 10.1 10.2 10.3 If the product is improved, the technical data and circuit diagram shall be subject to the final product nameplate and cabinet circuit label.
Need help?
Do you have a question about the MRF-288 and is the answer not in the manual?
Questions and answers