Resetting Your Media Player; System Setup - Seagate STCEA101-RK - FreeAgent Theater - Digital AV Player User Manual

2. Setting Up FreeAgent | Theater
The higher the resolution your TV can support, the better your picture will be. If
you select a high resolution but are unable to see a picture, select a lower
resolution until a picture appears on your TV.
If you're having trouble getting any picture at all on your TV, you might have a
problem with your cable connections or a video resolution that's set too high. If
you're sure your cables are connected properly and you still can't get a
picture, press the reset button on the rear of the media player to reset the
device for your region. The reset causes the unit to display the lowest video
resolution, which most televisions are capable of displaying.
Also press the Input button on your TV to switch to the input to which the
media player is connected.

Resetting Your Media Player

On the rear of the media player is a reset button.
Figure 11:
•
•
•

System Setup

To configure your system language preferences,
FreeAgent® | Theater™ User Guide
Reset Button
Press once to reset the device to the PAL European TV standard.
Press a second time to reset the device to the NTSC American TV
standard.
Hold for 10 seconds to restore factory default settings.
Configuring Your Media Player
Reset
17