Download Print this page

Advertisement

Quick Links

INSTALLATION GUIDE
SL-2-DC Controller
Section Outline
1.
Overview
2.
Pre-Installation Notes
3.
Installation
4.
Operation
5.
Wiring Diagrams
1. OVERVIEW
This document provides instructions for installing the Outdoorlink
all applicable local electrical codes prior to installation. For detailed technical information refer to the SL-2-
DC technical data sheet here, or at https://outdoorlinkinc.com/documentation/.
Controller Overview
Marking
STATUS
PORT 2
ON / OFF 2
PORT 1
ON / OFF 1
IN1
OUT1
IN2
OUT2
AUX
USB 2.0 Micro B
SERIAL
NONE
(+)
(-)
© 2024 Outdoorlink, Inc.
Description
LED light indicating cellular connection status
LED light indicating Port 2 is powered
Manual push button turn Port 2 on or off
LED light indicating Port 1 is powered
Manual push button turn Port 1 on or off
DC power IN to Port / Device 1 also provides power to the controller
DC power OUT to Port / Device 1
DC power IN to Port / Device 2
DC power OUT to Port / Device 2
Auxiliary device connection (example: battery thermistor)
USB connection for troubleshooting device
RJ45 serial port
SMA/F Connector - External antenna connection.
Positive polarity
Negative polarity
Page 1 of 3
SL-2-DC controller. Review and adhere to
®
(256) 885-9768 | www.outdoorlinkinc.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SL-2-DC and is the answer not in the manual?

Questions and answers

Summary of Contents for outdoorlink SL-2-DC

  • Page 1 Installation Operation Wiring Diagrams 1. OVERVIEW This document provides instructions for installing the Outdoorlink SL-2-DC controller. Review and adhere to ® all applicable local electrical codes prior to installation. For detailed technical information refer to the SL-2- DC technical data sheet here, or at https://outdoorlinkinc.com/documentation/.
  • Page 2 4. If the controller is installed inside of a metal or location where it is not able to connect to the cellular network when closed it may require an external antenna to be routed outside of the enclosure. The SL-2-DC has two antenna modes: internal and external. By default, it is set to internal mode when shipped. •...
  • Page 3 SL-2-DC Controller Installation Guide 5. Important: Once the controller is installed and connected to the cellular network use the Outdoorlink web or mobile application to add the controller to a site and activate it or contact Outdoorlink support at (256) 885-9768.

This manual is also suitable for:

Smartlink sl-2-dc-002