Input Unit Request; Input Barcode Data Request - Pioneer DVD-V7200 Command Manual

Format :
Explanation :
Error Codes logged since the unit was turned on.
6.30

Input Unit Request

Function :
Format :
Explanation :
command data from a Remote Control Unit.
There are two type code, one is a four-digit code the other is a eight-digit code
(extension code). When the input command data is two words (eight-digit) in length,
the player truncates or shortens the information. A truncated code consists of an
Upper Byte from the First Code and a Lower Byte from the Second Code. The
player creates a Returning Code or Double Code from these two Bytes.
Once the player returns an Input Code, a FFFFh Code (no reactions from the Remote
Control) repeats until a new code is sent from the Remote Control Unit.
Execution :
Command String
#I<CR>
#I<CR>
#I<CR>
#I<CR>
6.31

Input Barcode Data Request

Function :
Format :
Explanation :
from a Barcode reader.
NOTE: When the input data is unacceptable for the current disc type, the player
returns an incorrect code.
Execution :
Command String
#B<CR>
?E
The player returns the most recent error codes. The report consists of
Returns a code for data input through a Remote Control Unit
#I
The player returns a four-digit ASCII-Hex Code that represents input
Status Return
A39F<CR>
FFFFh<CR>
A3BE<CR>
FFFFh<CR>
Returns input data through a Barcode Reader
#B
The player returns an ASCII Code that represents input command data
Status Return
4307<CR>
- 65 -
Current Address Request Descriptions
DVD-V7200
Receives the Pause Key command -
(A39F)
Receives the Audio Key command -
(A399_AFBE)
DVD-V7200
Receives a Play code about DVD disc