Related Manuals for Lightronics SR617D
Summary of Contents for Lightronics SR617D
- Page 1 SR617D/SR617W ARCHITECTURAL CONTROLLER Version: 1.0 Date: 10/3/2023 www.lightronics.com Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 757 486 3588...
-
Page 2: Table Of Contents
SR617 ARCHITECTURAL CONTROLLER OWNER’S MANUAL Version 1.0 10/03/2023 TABLE OF CONTENTS __________________________________________________________________ DESCRIPTION __________________________________________________________________ POWER REQUIREMENTS __________________________________________________________________ SR617D INSTALLATION CONNECTIONS POWER CONNECTIONS DMX CONNECTIONS REMOTE CONNECTIONS PUSHBUTTON/FADER SMART REMOTE CONNECTIONS SIMPLE SWITCH REMOTE STATIONS __________________________________________________________________ SR617W INSTALLATION CONNECTIONS POWER CONNECTIONS... -
Page 3: Description
SR617D INSTALLATION connector pin assignments are shown in the table below. Pin numbers are visible on the connector face. The SR617D is portable and is intended to be used on a desktop or other suitable horizontal surface. Connector Pin #... -
Page 4: Simple Switch Remote Stations
SIMPLE SWITCH REMOTE STATIONS SR617W EXTERNAL CONNECTIONS The first five pins of the SR617D DB9 connector are used to connect simple switch remote signals. They are COM, SWITCH 1, SWITCH 2, SWITCH 3, COM. -
Page 5: Power Connections
PUSHBUTTON/FADER SMART REMOTE CONNECTIONS These remotes include the Lightronics line of AC, AK, AF and AI remote stations. Communication with these stations is over a 4 wire bus which consists of dual twisted pair, shielded low capacitance (25pF/foot or less) data cable(s). -
Page 6: Record Button
60 seconds if a code is entered and step 4 is not The MAINTAIN setting allows the use of a regular performed. ON/OFF switch. When used this way, the applicable www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588... -
Page 7: Setting Simple Switch Input Options
CONTINUOUS DMX TRANSMISSION SR617 will continue to send DMX string at 0 values SCENE 1 REMOTE BUTTON STATION LOCKOUT with no DMX input and no scenes active rather than www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588... -
Page 8: Controlling Exclusive Scene Activation
5. Press 3327, then wait for the LEDs to flash 3. Push REC to save the new group set. acknowledging your entry. www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588... -
Page 9: Factory Reset Warning
4. Push the button for the scene you want recorded. the SR617. This can only be restored by sending the SR617 back to Lightronics for reprogramming. The REC and scene lights will go OFF which shows that recording was completed. -
Page 10: Recall Last Scene
SR617. Scenes active with AF stations OPERATING AND MAINTENANCE ASSISTANCE will remain at the levels set on the faders. Dealer and Lightronics factory personnel can help you with operation or maintenance problems. Please read the applicable parts of this manual before calling for MAINTENANCE AND REPAIR assistance. -
Page 11: Sr617 Configuration Setup Menu
Page 11 of 11 SR617 ARCHITECTURAL CONTROLLER OWNER’S MANUAL Version 1.0 10/03/2023 www.lightronics.com Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588...
Need help?
Do you have a question about the SR617D and is the answer not in the manual?
Questions and answers