Configuration (Unix); Overview; Configuration Files - AVIRA ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS User Manual

Table of Contents

Advertisement

4

Configuration (UNIX)

You can adjust AntiVir VSA for optimum performance. You can make the most important
adjustments immediately after installation. The most common settings are suggested.
You can modify these settings at any time to adapt the product to your requirements.
After a short overview, you will be guided step by step through the configuration process:
Information on the configuration files:
The procedure for using the configuration script:
Page 20.
Specific configuration for AntiVir VSA:
4.1

Overview

Configuration
The configuration file avupdater.conf defines automatic software updates; the file
files
avsapvsa.conf defines the scanning parameters and logging rules when viruses or
unwanted programs are detected.
Configuration
You can use the script configantivir, located in /usr/lib/AntiVir, to edit the settings in
script
avupdater.conf (Updater settings).
4.2

Configuration Files

This section describes the structure of AntiVir VSA configuration files avsapvsa.conf and
avupdater.conf. AntiVir reads these files on program start-up. It ignores empty lines and
commented lines beginning with #.
The program is provided with default values which are important for many procedures.
Some options can be deactivated with a # at the beginning of the line (commented). These
can be activated by removing the # character or by changing the values.
Avira GmbH
-
Parameters in the Configuration File avsapvsa.conf
-
Parameters in the Configuration File avupdater.conf
If you wish to use the configuration script, you can skip this Section.
-
Configuring Regular Updates
You can make these settings directly in the configuration files. This is
not very difficult.
A more convenient way is to use the configuration script included in
the program. It intercepts possible errors and restarts the necessary
processes.
You must restart the Internet Update Daemon if you modify any
values manually in avupdater.conf, without using the configuration
script. The changes will only take effect after a restart.
Type:
/usr/lib/AntiVir/avupdater restart
AntiVir Virus Scan Adapter
– Page 18 and
Configuration Script configantivir
– Page 22.
Configuration (UNIX)
– Page 19.
17

Advertisement

Table of Contents
loading

Table of Contents