Features; Precautions - Haier PDVD770 User Manual

FEATURES

HIGH QUALITY SOUND AND PICTURE
—
96 kHz/24 bit audio D/A converter
This player enables 96 kHz/24 bit linear PCM signals, which
constitute the highest specifications in the DVD standards,
to be reproduced faithfully. To support 96 kHz sampling/24
bit sound, the shaping noise of this multi-level digital sigma
type of D/A converter is kept flat up to 44 kHz, thus
preventing the important audio signals from being affected
in any way. In terms of the bottom line, the sound in all of its
various modes is reproduced faithfully.
—
12 bit video D/A converter
With its 12 bit capability, this D/A converter reproduces
images faithfully.
7" TFT DISPLAY
This player build in 7" TFT display window, provide you clear
vision, and low radiation.
ENCLOSED LITHIUM BATTERY PACK
This 7.4V rechargeable lithium battery pack can last about 2.5
hours, provide you playing disc everywhere.
MULTI TV SYSTEM SUPPORT
The player can play back discs with signal system of PAL and
NTSC.
GRAPHICAL USER INTERFACE SCREEN
Simply by pressing the DISPLAY button on the remote control
unit, information on the player and disc can be displayed on
the TV screen for easy identification, The player's operations
and settings can easily be performed by operating the remote
control while monitoring the TV screen.
MULTI-AUDIO FUNCTION
The audio soundtrack can be heard in up to 8 languages.
(The number of audio sound languages depends on the
software.)
MULTI-SUBTITLES FUNCTION
Subtitles may be displayed in one of a maximum of 32
languages depends on the software.
MULTI-ANGLE FUNCTION
This function allows you to choose the viewing angle of
scenes which were shot from a number of different angles.
(Limited to DVD recorded with multiple camera angles.)
PARENTAL LOCK FUNCTION
This can prevent play of DVD unsuitable for children.
DISC FORMATS SUPPORTED BY PLAYER
The player can play back discs bearing any of the following
marks:

PRECAUTIONS

Please read these precautions before operating this player.
Power Cord Protection
To avoid any malfunctions of the player, and to protect against
electric shock, fire or personal injury, please observe the
following.
—
Hold the plug firmly when connecting or disconnecting
the AC power cord.
—
Do not connect or disconnect the AC power cord when
your hands are wet.
—
Keep the AC power cord away from heating appliances.
—
Never put any heavy object on the AC power cord.
—
Do not attempt to repair or reconstruct the AC power
cord in any way.
—
Remove dust, dirt, etc. on the plug at regular intervals.
—
If the player has been dropped or otherwise damaged,
set the player to the standby mode and disconnect the
AC power cord.
—
If the player has fumes, odours or noise, set the player
to the standby mode and disconnect the AC power
cord.
Placement
Avoid placing the player in areas of:
—
Direct sunlight or heating radiators, or closed automobiles
—
High temperature (over 35 C) or high humidity (over 90%)
—
Excessive dust
—
Vibration, impact or where the surface is tilted as the
internal parts may be seriously damaged.
Non-use periods
When the player is not being used, set the player to the
standby mode.
When left unused for a long period of time, the player should
be unplugged from the household AC outlet.
No fingers or other objects inside
—
Touching internal parts of this player is dangerous, and
may cause serious damage to the player. Do not attempt to
disassemble the player.
—
Do not put any foreign object on the disc tray.
Keep away from water and magnetic object
—
Keep the player away from flower vases, tubs, sinks, etc. If
liquids are spilled into the player, serious damage could
occur.
—
Keep magnetic objects such as speakers, at a distance
from the player.
Stacking
—
Place the player in a horizontal position, and do not place
anything heavy on it.
—
Do not place the player on amplifiers or other equipment
which may become hot.
Condensation
Moisture may form on the lens in the following conditions:
—
Immediately after a heater has been turned on.
—
In a steamy or very humid room.
—
When the player is moved from a cold environment to a
warm one.
If moisture forms inside this player, it may not operate properly.
In this case, turn off the power and wait about one hour for the
moisture to evaporate.
If there is noise interference on the TV while a broadcast
is being received
Depending on the reception condition of the TV, interference
may appear on the TV screen while you are watching a TV
broadcast and the player is left on. This is not a malfunction of
the player or the TV. To watch a TV broadcast, set the player
to the standby mode.
3
°