SAFETY INFORMATION CAUTION: CAUTION DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPO- SURE IF DIRECTED. BE SURE TO OPERATE THE CAUTION: TO REDUCE THE RISK OF ELECTRIC DVD/VIDEO CD/CD PLAYER CORRECTLY AS IN- SHOCK, DO NOT REMOVE COVER (OR BACK).
NOTE: TABLE OF CONTENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Getting Started: FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential SAFETY INFORMATION...........1-2 installation.
FEATURES PRECAUTIONS HIGH QUALITY SOUND AND PICTURE Please read these precautions before operating this player. 96 kHz/24 bit audio D/A converter Power Cord Protection This player enables 96 kHz/24 bit linear PCM signals, which To avoid any malfunctions of the player, and to protect against constitute the highest specifications in the DVD standards, electric shock, fire or personal injury, please observe the to be reproduced faithfully.
Install the battery into the remote control as illustrated below: Attach the rechargeable battery pack onto the player's bottom as illustrated below: BATTERY PACK BOTTOM VIEW NOTE: This unit works either with the battery pack supplied or on AC power. Unplug the AC Power adapter from the DC input jack to use the battery pack (after it is fully charged).
CONNECTING YOUR DVD PLAYER CONNECTING TO A CAR ADAPTOR The 12V car power adaptor is designed for use with vehicles TO OTHER EQUIPMENT that have a 12V, negative ground electrical system. It is recommended you connect the player to a multi-system WARNING: Ensure that this player and other equipments (TV set and Disconnect the car power adaptor when not in...
SLOW-MOTION PLAY (DVD/VCD) MULTI-ANGLE VIEWING (DVD ONLY) Press SLOW button on the remote control during playback, Press ANGLE button during playback to display the number of the disc will be played at 1/ 2 normal speed at first, each time angles being played and then select a desired angle to view this button is pressed, the play speed becomes slower (down the scene.
PICTURE ROTATIONS 1.1 TV SYSTEM - it is used to select the TV mode. Press RIGHT and LEFT navigation buttons to rotate the Options: NTSC / PAL/ AUTO picture Clockwise and anti-clockwise respectively. Please select this option as per your TV set. 1.2 LCD MODE - It is used to select the LCD mode.
4. VIDEO SETUP DISC HANDLING PRECAUTIONS VIDEO SETUP VIDEO SETUP Hold the disc by the edge so the surface will not BRIGHTNESS CONTRAST be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion. SATURATION ...