Connecting To A Wireless Local Area Network (Wlan); Configuring The Network Clients - Asus O!PLAY TV PRO User Manual

Connecting to a wireless local area network (WLAN)

To connect to a WLAN:
1. Follow steps 2- 5 in Connecting to a home network wirelessly.
2. Select Infrastructure (AP) as your connection mode and press
TV PRO searches for wireless access points.
3. From the list, select the access point that you want to connect to. Press
4. Wait until your O!PLAY TV PRO connects to your selected access point.
5. When a wireless connection is successfully established, the IP address of the
selected access point is shown on the Network menu.
6. You may now start to access files from a network computer's shared folder.

Configuring the network clients

Setting an IP address for wired or wireless client
1. To access the ASUS O!PLAY TV PRO, you must have the correct TCP/IP
settings on your wired or wireless clients or computers. Ensure that the
clients' IP addresses are within the same workgroup and subnet as the
O!PLAY TV PRO.
2. Follow the instructions below that correspond to the operating system
installed on your computer.
Use the following default IP settings:
• IP address: 192.168.0.xxx (for wired computer) or 192.168.59.xxx (for
• Subnet Mask: 255.255.255.0 (same as the O!PLAY TV PRO)
2-4
E7161_O!Play_TV_PRO_Manual_V2.in4 4
wireless computer)
xxx can be any number between 2 and 254. Ensure that the IP address is not
used by another device.
Chapter 2: Network setup and services
. Your O!PLAY
.
3/2/12 10:36:54 AM