Comrex ACCESS Quick Start Manual

Quickstart Guide
1
2
3
4
Install the 2 antennae on the left side of the
modem by removing the plastic connector
caps and screwing each antenna onto one
of the available coaxial jacks labeled "ANT1"
and "ANT2".
The antennae are identical and can be
installed on either jack, although both
should be installed whenever the modem
is in use.
Once installed the antennae can swivel
freely and bend up to 90 degrees if needed,
but take care not to loosen the screw-on
connection while swiveling.
Connect Modem 2
What's in the Box?
Assembling the Modem
Install the SIM card on the left side of
the modem by inserting it into the slot in
between the antenna jacks. Use the included
adapter set when installing a "nano" or
"micro" SIM.
The SIM card should be oriented with
gold contacts facing upward (toward the
anntenae) and the notched-corner side
entering first, as depicted by the label icon.
Press SIM card in until it clicks to lock.
The antennae should be removed if more
clearance is required for inserting or
removing the SIM card.
- High Gain Antennas (x2)
Dual multi-position antennae for
professional-grade connectivity
- ACCESS Connect Modem 2 (x1)
The "body" of the modem with connection
jacks for antennae, SIM card and USB cable
- USB 3.0 "A-to-A" Cable (x1)
High speed USB 3.0 cable provides both
data and power to the modem
- SIM Card Adapter Set (x1)
Used to install "nano" and "micro" sized SIM
cards
Install the USB cable by inserting either end
of the "A-to-A" cable into the blue USB port
on the right side of the modem.
The cable can be used in either orientation
when installing the modem to a Comrex
codec.
Take care not to use this specialized cable
to connect other unsupported devices.