Toyota SIENNA 2004 Manual

Hide thumbs Also See for SIENNA 2004:

Service manual (516 pages)

Owner's manual (505 pages)

Operating manual (490 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

page of 182

/ 182
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Sienna_Navi_U (L/O 0309)

Foreword

Thank you for your purchase of the Navigation System. Please read this manual carefully to ensure proper use. Keep this

manual stored in your vehicle at all times.

The Toyota Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system

receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense. Using these

signals and other vehicle sensors, the system can show you where you are and assist you in locating a desired destination.

The navigation system is designed to select efficient routes from your present starting location to your destination. The system is

designed to direct you to a destination that is unfamiliar to you in an efficient manner. The system uses the maps of DENSO

based on NAVTECH maps, GDT maps and infoUSA POIs. The calculated routes are neither the shortest routes nor routes without

traffic congestion. Your own personal local knowledge or "short cut" may at times be faster than the calculated routes.

The navigation system's database includes about 50 point of interest categories to allow you to easily select destinations such as

restaurants and banks. If a destination is not in the database, you can enter the street address or a major intersection close to it

and the system will route you there. The system will provide both a visual map and audio instructions. The audio instructions will

announce the distance and direction to go when you are approaching a fork or intersection. These voice instructions will help you

keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down.

Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to

perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle

condition or other circumstances. For more information on the limitations of the system, refer to pages 59 through 61.

2003 TOYOTA MOTOR CORPORATION

whole or in part, without the written permission of Toyota Motor Corporation.

2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U)

Table of Contents

Need help?

Do you have a question about the SIENNA 2004 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toyota SIENNA 2004

Page 1 The Toyota Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense. Using these signals and other vehicle sensors, the system can show you where you are and assist you in locating a desired destination.
Page 2 “ACC”, initial hicle or its equipment if the warning “TOYOTA” screen appears is ignored. You are informed about system begins operating. what you must or must not do in Touch either “English” or “French” to order to avoid or reduce the risk of select a language.
Page 3 Sienna_Navi_U (L/O 0309) “I agree” When touch switch screen, “map” screen appears. You can access this screen when you push the “INFO” button and touch the “Language” switch. Then you can select a language. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 4: Safety Instruction
Sienna_Navi_U (L/O 0309) Safety Instruction This system is intended to assist you in For your safety, some functions may be- reaching your destination and, if used come inoperable when you start driving. properly, can do so. You, as the driver, Unavailable switches are dimmed.
Page 5 Sienna_Navi_U (L/O 0309) While you are driving, listen to the voice Use this system only in locations where instructions as much as possible and it is legal to do so. Some states/prov- glance at the screen briefly and only inces may have laws prohibiting video when it is safe.
Page 6 Sienna_Navi_U (L/O 0309) 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 7: Switch Operation
Sienna_Navi_U (L/O 0309) Overview of Touch Screen and Switches Switch operation This system is operated mainly by the switches on the screen. To prevent damage to the screen, lightly touch switches on the screen with your fin- ger. When you touch a switch on the screen or push button,...
Page 8 Sienna_Navi_U (L/O 0309) Symbols, Switches and Buttons Current vehicle position mark North−up or heading−up symbol Indicates the current position. GPS mark (Global Positioning and scale of map For details, see page 38. System) Indicates a map view with north up Whenever your vehicle is or heading up.
Page 9 Sienna_Navi_U (L/O 0309) Changing the route guidance When you touch this switch, the “Change route” screen will appear. For details, see page 49. One−touch registration of marked point To register the current vehicle position as a marked point. For details, see page 84. Display of point of interest Symbols such as restaurants and hotels,...
Page 10: Table Of Contents
Sienna_Navi_U (L/O 0309) SECTION BASIC FUNCTIONS Descriptions of basic operations in frequent use Your navigation system ........Inputting letters and numbers .
Page 11: Your Navigation System
Sienna_Navi_U (L/O 0309) Your navigation system Inputting letters and numbers The navigation system is operated by CAUTION switches on the screen and the but- tons located on the front face around Take care not to jam your hand the screen. When you touch a switch while the display is moving.
Page 12 Sienna_Navi_U (L/O 0309) Touching the “List” switch will change appears to the right of the the screen to a display of the database item name, the complete name items that match the name or address is too long for the display. that you have entered on the screen.
Page 13: How To Move The Cursor
Sienna_Navi_U (L/O 0309) How to move the cursor L00016 “Adjust” 1. Touch the switch to move the cursor 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 14 Sienna_Navi_U (L/O 0309) L00017 "Position locating screen on the map 2. When you touch an arrow facing your desired point, the map scrolls in that direction. When you release your finger, scrolling stops. “Enter” 3. If you touch the switch, the position of cursor is set.
Page 15: Destination Input Explains 11 Ways To Input Your Destination
Sienna_Navi_U (L/O 0309) Destination input Touch the “DEST” tab on the screen and the “Destination” screen appears. States included in the search Switch area Idaho L00019 Oregon Washington L00018 California Nevada Arizona Touch through “US1” Colorado switches to select a search “CAN”...
Page 16 Sienna_Navi_U (L/O 0309) You can find your destination using vari- Alabama Canada ous methods. See pages 10 through 24 Arkansas Provinces and regions included for the detailed steps. Louisiana Switch in the search area Mississippi Tennessee Alberta British Columbia Connecticut Manitoba Maine New Brunswick...
Page 17 Sienna_Navi_U (L/O 0309) 3. By Address: You can input the house number and the street address by using the input keys. See page 11 for the detailed steps. 4. By POI: You can select one of the many points of interest that have been already stored in the system’s database. There are about 50 categories to choose from, including restaurants, banks and automotive locations.
Page 18 Sienna_Navi_U (L/O 0309) 5. By Marked Points: You can register your own favorite destinations as a “Marked Points”. The system allows you to store up 100 marked points. See page 19 for the detailed steps. 6. By Previous Destination: You can select a destination from any of the last 20 previously set destinations. See page 20 for the detailed steps.
Page 19 Sienna_Navi_U (L/O 0309) Destination input by HOME 11. By Map Selection: You can select a destination simply by touching the location on the displayed map. See page 24 for the detailed steps. INFORMATION Touch the switch on the “Destina- D When inputting the destination, the D When setting the destination, you tion”...
Page 20 Sienna_Navi_U (L/O 0309) Destination input by PRESET Destination input by (a) Inputting a house number DESTINATION ADDRESS and a street name “Address” Touch the switch on the Touch any of — (preset des- “Destination” screen. The “Address” tination) switches on the “Destination” screen appears, and then you can in- screen.
Page 21 Sienna_Navi_U (L/O 0309) L00022 L00015 L00023 After each letter is input, the system If you input a street name first, the When you find your desired street searches the database for street names screen changes. You can then input the name, touch of the item.
Page 22 Sienna_Navi_U (L/O 0309) (b) Selecting a city to search The screen for selecting last 5 cities ap- The screen for inputting a city name ap- The current screen changes to the pears if you touch the “Input city pears if you touch the switch on “City”...
Page 23 Sienna_Navi_U (L/O 0309) Destination input by POI (a) Input the name directly “POI” There are 3 ways to select a point of Touch the switch on the “Des- interest location. tination” screen. (a) Input the name directly (b) Selecting a city to search L00028 (c) Selecting from the categories It will not take a long time for you to...
Page 24 Sienna_Navi_U (L/O 0309) (c) Selecting from the (b) Selecting a city to search categories “City” “Category” Touch the switch on the “POI” Touch the switch on the screen. “POI” screen. L00030 L00029 L00031 Input the city name. If the number of sites becomes 4 or less, Last 5 cities are displayed on the categories shown...
Page 25 Sienna_Navi_U (L/O 0309) When you touch the of your de- sired item, the screen changes and displays the map location of the se- lected destination and the route prefer- ence. (See “(a) Entering destination” L00033 L00183 on page 25.) Once you have selected a category, you If you input the name of a specific point can touch letters directly on the screen of interest and there are more than two...
Page 26 Sienna_Navi_U (L/O 0309) POI (Points of Interest) icons PARKING LOT RESTAURANT CONTINENTAL JAPANESE MEXICAN RENTAL CAR AGENCY TOYOTA DEALERSHIPS CHINESE SEAFOOD (all search areas) LEXUS DEALERSHIPS FRENCH SHOPPING (all search areas) ITALIAN GROCERY STORE AUTOMOBILE CLUB AUTO SERVICE & OTHER...
Page 27 Sienna_Navi_U (L/O 0309) CONVENTION/EXHIBITION GOLF COURSE WINERY CENTER SKI RESORT CITY HALL COURT HOUSE AMUSEMENT PARK POLICE STATION TRAIN STATION (all search areas) SPORTS COMPLEX LIBRARY AIRPORT (all search areas) CASINO HOSPITAL BUS STATION PARK/RECREATION MARINA COMMUTER RAIL STATION (all search areas) TOURIST ATTRACTION CIVIC/COMMUNITY FERRY TERMINAL...
Page 28 Sienna_Navi_U (L/O 0309) Destination input by MARKED POINTS “Marked points” Touching switch on the “Destination” screen dis- plays your list of registered marked PARK AND RIDE SCHOOL points. See page 77 on registering and editing marked points. REST AREA L00037 TOURIST INFORMATION HIGHER EDUCATION HISTORICAL MONUMENTS...
Page 29: Previous Destination
Sienna_Navi_U (L/O 0309) Destination input by PREVIOUS DESTINATION “Prev. dest” You can delete the list of previous des- There are 3 ways to list the marked Touch the switch on tinations while you stop your car, if you point by touching switches on bottom the “Destination”...
Page 30 Sienna_Navi_U (L/O 0309) Destination input by EMERGENCY “Emergency” touching INFORMATION switch on the “Destination” screen, the display changes to a screen to select navigation system does dealers, hospitals or police stations. guide in areas where route guidance L00041 During driving, only nearby police sta- is unavailable.
Page 31 Sienna_Navi_U (L/O 0309) Destination input by INTERSECTION “Intersection” Touch the switch on the “Destination” screen. L00043 EMV3111U L00042 Touch the of your desired item. After inputting the two intersecting If the same two streets cross at more streets, the screen changes and dis- Input the name of the two intersecting than one intersection, the screen changes plays the map location of the selected...
Page 32 Sienna_Navi_U (L/O 0309) Destination input by FREEWAY ENTRANCE or EXIT To input a freeway entrance or exit, “FWY Ent./Exit” touch the switch on the “Destination” screen. L00045 L00047 L00044 Select the desired freeway by touching Touch the of the desired entrance or exit name.
Page 33: Destination Input By Map
Sienna_Navi_U (L/O 0309) Destination input by PREVIOUS STARTING POINT Destination input by MAP “Previous starting “Map” There are 2 ways to list the freeway Touch Touch the switch on the “Des- point” entrance or exit. switch on the “Destination” tination” screen. screen.
Page 34: Setting And Deleting Destination
Sienna_Navi_U (L/O 0309) Setting and deleting destination (a) Entering destination You are given a number of choices on The switches you select are highlighted After you input the destination, the the conditions which the system uses to in green. After choosing conditions, touch screen changes and displays the map determine the route to your destination.
Page 35 Sienna_Navi_U (L/O 0309) (b) Adding destinations Quick: A route by which you can reach the destination in the shortest time This route is indicated by an orange line. Short: A route by which you can reach L00052 the destination in the shortest distance This route is indicated by a purple line.
Page 36 Sienna_Navi_U (L/O 0309) L00059 “Edit route” 2. Touch the switch. L00056 “Add” 3. Touch the switch under “Destination”. 4. Input an additional destination in the same way as the destination input. (See page 25.) 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 37 Sienna_Navi_U (L/O 0309) L00055 “Add” 5. The add destination screen appears. Touch the switch that you want to add a destination. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 38 Sienna_Navi_U (L/O 0309) (c) Reorder destinations “MENU” “Edit route” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch. L00056 “Reorder” 2. Touch the switch under “Destination”. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 39 Sienna_Navi_U (L/O 0309) (d) Deleting destination L00057 3. Select the destinations in the order of arrival by touching the switch. After you finished selecting the destina- tions, touch the “OK” switch. The pre- vious screen returns. L00056 “Delete” 1. Touch the switch under “Destination”.
Page 40: Setting And Deleting Preferred Road
Sienna_Navi_U (L/O 0309) Setting and deleting preferred road (a) Adding preferred road “Yes” 3. A message appears to confirm your request to delete. To delete the destination(s), touch the switch. If you touch the switch, the data “Yes” cannot be recovered. If you touch the “No”...
Page 41 Sienna_Navi_U (L/O 0309) (b) Modifying preferred road “Next” Touch the switch to change Select the preferred road which you the road type. want to modify and touch the switch. L00056 L00061 L00063 “Modify” Touch the switch under “Set preferred road”. The “Modify pre- ferred road”...
Page 42: Search Condition
Sienna_Navi_U (L/O 0309) (c) Deleting preferred road Search condition “Delete” 1. Touch the switch under “Set preferred road”. The “Delete preferred road” screen appears. L00064 “Delete all” 2. Select the preferred road which you want to delete. Touch the switch if you want to delete all preferred roads.
Page 43: Route Guidance Screen
Sienna_Navi_U (L/O 0309) “Search Condition” Route guidance screen Touch switch on the “Edit route” screen. The The route guidance system has two “Search condition” screen appears. different screen modes. L00065 L00067 L00072 Split screen: Map and guidance screen are shown in a screen mode. (For detail “Quick”...
Page 44 Sienna_Navi_U (L/O 0309) Upon reception signals The “Change route” screen INFORMATION from the GPS (Global Posi- appears following tioning System), this mark settings are available. If the calculated route includes a trip appears. (For details, by ferry, the route guidance shows a page 59.) sea route.
Page 45: Route Overview
Sienna_Navi_U (L/O 0309) Route overview Route preview “Route preview” To review the route to the Touch the switch previous starting point on the “Menu” screen. The “Route pre- fast−forward mode view” screen appears. To indicate the previous start- L00059 ing point L00070 “Route overview”...
Page 46 Sienna_Navi_U (L/O 0309) L00071 “Edit” Touch the switch to display the “Edit route preview” screen. To next POI: Preview the next POI. : Preview the next destination. To next Delete: Delete the POI icon. Select POI: Select the POI icon. Touch the “OK”...
Page 47: Current Position Display
Sienna_Navi_U (L/O 0309) Current position display Voice guidance Voice guidance to the destination dur- INFORMATION ing route guidance. Use voice guid- ance just for your reference. When you use the “one−touch” scroll You can adjust the volume of the voice feature, the current vehicle position or turn off voice guidance.
Page 48: Typical Voice Guidance Prompts
Sienna_Navi_U (L/O 0309) Typical voice guidance prompts INFORMATION freeways, interstates other highways with higher speed limits, L00075 the voice guidance will be made at UN301 earlier points than on city streets in order to allow time to maneuver. Touch number select “Off”...
Page 49 Sienna_Navi_U (L/O 0309) 4.2 miles One−way road 0.25 miles NZ018 EMV3114U EMV3115U One−way road ∗ : The system indicates a U−turn if the The system announces your approach to “Proceed about 4 miles to the distance between two one−way roads (of the final destination.
Page 50: Registering Your Home
Sienna_Navi_U (L/O 0309) Registering your home INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal recep- tion), the voice guidance may be made early or delayed. D If you did not hear the voice guid- “MAP/ ance command, touch the VOICE”...
Page 51 Sienna_Navi_U (L/O 0309) If you register your home address be- forehand, you can easily set the route back to your home. L00059 “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch.
Page 52 Sienna_Navi_U (L/O 0309) If your home is already registered, the switch will appear. “Delete home” L00077 You may register the location of your home by ten different methods: ad- dress, POI, marked points, previous destination, intersection, freeway en- trance/exit, map, current position or preset destinations.
Page 53: Deleting Your Home
Sienna_Navi_U (L/O 0309) DELETING YOUR HOME L00059 “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch. L00078 “Delete home” 2. Touch the switch on the “Marked points” screen. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 54: Registering Preset Destinations
Sienna_Navi_U (L/O 0309) Registering preset destinations You can register up to 5 preset des- tinations. L00079 The screen changes and displays the map location of home and a message. If you are sure that you want to delete, touch the “Yes”...
Page 55 Sienna_Navi_U (L/O 0309) L00081 3. Touch any of the — switches for which you want to register the preset destination. If you have already registered a preset destination, you can overwrite it. L00082 4. Input the preset destination in the same way as the destination input. (See page 25.) 2004 SIENNA Navigation from Sep.
Page 56 Sienna_Navi_U (L/O 0309) EDITING PRESET DESTINATIONS “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch. L00080 “Edit” 2. Touch the switch under “Preset destinations ”. L00083 3. Select the destination that you want to edit and touch the switch.
Page 57 Sienna_Navi_U (L/O 0309) DELETING PRESET DESTINATIONS L00084 You can change the name, location and phone number of the preset destination in the same way as editing marked points. “Change” Touch the switch. (See page 78.) “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu”...
Page 58: Detour Setting
Sienna_Navi_U (L/O 0309) Detour setting L00085 3. Select the destination that you want to delete and touch the switch. If you want to delete all the preset “Delete destinations, touch When you are driving while the route all” switch. guidance is operating, you can change Messages appear depending on the type the route to detour around a section of deletion.
Page 59 Sienna_Navi_U (L/O 0309) Detour route suggested by the sys- INFORMATION D When your vehicle is on a freeway, the detour distance selections are L00086 5, 15, and 25 miles. D The system may not be able to cal- culate a detour route depending on selected distance sur-...
Page 60: Displaying Poi
Sienna_Navi_U (L/O 0309) Displaying POI A window with a limited choice of points Points of interest such as gas stations of interest will be displayed. When you and restaurants can be displayed on touch your desired type of point of inter- the map screen.
Page 61: Turn List
Sienna_Navi_U (L/O 0309) Turn list By turning the “Route” switch on, you The map will shift so that the symbol is You can change from the map screen can search for POIs on the route when centered on the screen and overlaps with to a “Turn list”...
Page 62 Sienna_Navi_U (L/O 0309) L00091 “Turn list” 2. The screen will change to the entire route map screen where you can touch the switch. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 63 Sienna_Navi_U (L/O 0309) “Map” Touch the switch of your de- INFORMATION sired point. point which choose displayed D The current vehicle position mark L00092 screen. appears bottom screen next to the name of the street you are driving on. The mark does not move.
Page 64: Map Appearance
Sienna_Navi_U (L/O 0309) Map appearance You can select the single screen map or the dual screen map. You can also change the half of the screen to the guidance screen by touching the map/ guidance switch while the map screen is displayed.
Page 65 Sienna_Navi_U (L/O 0309) L00094 2. The screen will change to the “Map appearance” screen and you can select the map mode and the guidance mode. Map mode Single map Dual map To display single map screen To display dual map screen Guidance mode L00074 L00097...
Page 66: Map Scale
Sienna_Navi_U (L/O 0309) Map scale Arrow screen Turn list screen L00098 L00095 L00096 Touch to change the scale of the map display. The scale bar and This screen shows the current road name The screen shows the Turn list. You can- indicator at the bottom of the screen indi- and the distance to the next corner.
Page 67: Screen Scrolling
Sienna_Navi_U (L/O 0309) Screen scrolling If you touch switches such as “Mark” INFORMATION , etc., the screen does not scroll “POI” and the selected function operates. When the map scale is at the maxi- mum range of 128 miles, will After you scroll the screen, the map re- L00099 disappear.
Page 68: Orientation Of The Map
Sienna_Navi_U (L/O 0309) Limitations of the navigation Orientation of the map system You can change the orientation of the This navigation system calculates the map from the north−up to the head- current vehicle position using satellite ing−up touching orientation signals, various vehicle signals, map L00100 symbol on the screen.
Page 69 Sienna_Navi_U (L/O 0309) (a) Accurate current vehicle position may not be shown in the following cases: The GPS satellites may not send signals When driving on a small angled Y− due to repairs or improvements being shaped road. made to them. When driving on a spiral road.
Page 70 Sienna_Navi_U (L/O 0309) (b) Inappropriate route guidance may occur in the following cases: When the tire pressure in any of the When turning at a wrong intersection If the route to your destination in- four tires is not correct. off the designated route guidance cludes gravel, unpaved roads or al- leys, the route guidance may not be If you set more than one destination...
Page 71: Map Database Information And Updates
Sienna_Navi_U (L/O 0309) Map database information and updates There are two types of areas available This system uses the maps of DENSO for route guidance. (See the following based on NAVTECH maps, GDT maps pages.) In one type of area, primarily and infoUSA POIs.
Page 72 “Menu” screen. The “DVD information” screen ap- The map database is normally updated pears and displays the map database once a year. Contact your Toyota dealer version. for information about the availability and pricing of an update.
Page 73 Sienna_Navi_U (L/O 0309) Route guidance availability NZY019 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 74 Sienna_Navi_U (L/O 0309) Route guidance availability NZY020 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 75 Sienna_Navi_U (L/O 0309) Route guidance availability NZY021 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 76 Sienna_Navi_U (L/O 0309) Route guidance availability NZY022 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 77 Sienna_Navi_U (L/O 0309) Route guidance availability NZY023 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 78 Sienna_Navi_U (L/O 0309) Route guidance availability NZY024 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 79 Sienna_Navi_U (L/O 0309) Route guidance availability NZY025 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 80 Sienna_Navi_U (L/O 0309) Route guidance availability NZY026 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 81 Sienna_Navi_U (L/O 0309) Route guidance availability NZY027 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 82 Sienna_Navi_U (L/O 0309) Route guidance availability NZY028 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 83 Sienna_Navi_U (L/O 0309) Route guidance availability NZY029 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 84 Sienna_Navi_U (L/O 0309) 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 85: Advanced Functions
Sienna_Navi_U (L/O 0309) SECTION ADVANCED FUNCTIONS Descriptions of operations for more effective use Marked points ..........Area to avoid .
Page 86 Sienna_Navi_U (L/O 0309) Marked points (a) Registering marked points You can register and keep your own marked points of interest list (like res- taurants, sports facilities, etc.) and use the marked points to input a destina- L00059 tion. “MENU” “Marked points” 1.
Page 87 Sienna_Navi_U (L/O 0309) (b) Editing marked points L00104 A screen similar to that for destination input appears. Input the address of the marked point in the same way as any destination input. See pages 10 through “Back” 3. After you finish registering the marked point, touch the switch.
Page 88 Sienna_Navi_U (L/O 0309) “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch. L00078 “Edit” 2. Touch the switch under “Marked points”. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 89 Sienna_Navi_U (L/O 0309) CHANGING THE ICON L00106 L00105 L00107 “Change” The screen lists the marked points. Touch the switch to edit the each item. Sort by Icon: Touch this switch to list Touch your desired icon. the marked points in order of the type of Page 1 and page 2: You can select one symbol.
Page 90: Changing The Name
Sienna_Navi_U (L/O 0309) CHANGING THE NAME CHANGING THE PHONE NUMBER L00109 L00108 L00110 Touch the direction switches and adjust the direction. Touch the switch. “OK” Touch alphabet or numeral keys direct- Touch numeral keys directly. The buzzer sounds when your vehicle ap- ly to input the name.
Page 91: Changing The Position
Sienna_Navi_U (L/O 0309) (c) Deleting marked points register marked CHANGING THE POSITION points. If you attempt to register more than 100, a message appears for con- firmation. L00111 L00118 Touch the arrows to scroll to your de- sired point on the map screen. Touch the switch when the cursor “OK”...
Page 92 Sienna_Navi_U (L/O 0309) “MENU” “Marked points” 1. Touch the tab on the screen to display the “Menu” screen and touch the switch. L00078 “Delete” 2. Touch the switch under “Marked points”. L00112 3. Touch of the marked point to delete. 2004 SIENNA Navigation from Sep.
Page 93 Sienna_Navi_U (L/O 0309) (d) One−touch marked point registration A screen for confirmation will appear with the map of the marked point. If “Yes” you want to delete it, touch “No” “Back” Touching will re- L00115 turn to the previous screen. L00114 If you want to delete all of the marked “Delete...
Page 94 Sienna_Navi_U (L/O 0309) Area to avoid If you want to register a new point, de- Any areas you want to avoid due to lete one of the marked points. See “(c) traffic jams, construction work or other Deleting marked points”. reasons can be registered as areas to avoid.
Page 95 Sienna_Navi_U (L/O 0309) (a) Registering area to avoid INFORMATION D Some areas and freeways may not be able to be set as an avoid point. D If a destination is input in the avoid area or the route calculation cannot be made without running through the avoid area, a route passing through the avoid area may be shown.
Page 96 Sienna_Navi_U (L/O 0309) “OK” (b) Editing area to avoid 3. Touch the switch when the cursor is at the center of the area that you want to avoid. L00121 4. Depending on the contents to be edited, touch either switch. When you touch the “OK”...
Page 97 Sienna_Navi_U (L/O 0309) “Edit” 1. Touch the switch under “Area to avoid” to display the “Edit area to avoid” screen. L00123 2. Touch the point you want to edit from the list. L00124 L00125 You can edit the name, location and size of the area to avoid.
Page 98 Sienna_Navi_U (L/O 0309) (c) Deleting area to avoid INFORMATION D If you try to change the map to an inappropriate scale, a message ap- pears. D For magnification or reduction of the map scale, see page 57. “Delete” 1. Touch the switch under “Area to avoid”...
Page 99: Current Position Calibration
Sienna_Navi_U (L/O 0309) Delete all: All the areas to avoid regis- Current position calibration tered in the system are deleted. L00128 L00127 3. Either of the above messages appears. To delete the area(s), touch the “Yes” switch. The current vehicle position mark will If you want to try again or cancel the be automatically corrected during driv- deletion, touch the...
Page 100 Sienna_Navi_U (L/O 0309) L00129 “Calibration” 2. Touch the switch. L00129 “Position/Direction” 3. Touch the switch. INFORMATION For additional information on current position accuracy, see “Limitations of the navigation system” on page 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 101 Sienna_Navi_U (L/O 0309) POSITION/DIRECTION CALIBRATION L00130 1. Touch the scroll arrows to move the cursor to your desired location. Touch the “OK” switch. L00131 2. Touch either the left or right arrow to correct the direction of the current vehicle position mark. Touch the “OK”...
Page 102 Sienna_Navi_U (L/O 0309) The tire change calibration function should be used when the tires are re- placed. This will adjust for any pos- sible change in tire circumference from the old tires to the new ones. If this procedure is not performed when tires are replaced, the current vehicle posi- tion mark may become incorrect.
Page 103: More Advanced Functions
Sienna_Navi_U (L/O 0309) SECTION MORE ADVANCED FUNCTIONS Convenient features Setup ............Map color .
Page 104: Setup
Sienna_Navi_U (L/O 0309) Setup You can set the values shown on the “Setup” screen. “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch to display the “Setup” screen. Select your desired items you want to set. Selected items will be highlighted in green.
Page 105: Map Color
Sienna_Navi_U (L/O 0309) change “km” Auto reroute Map color Distance: “miles” to display your desired units. Notify seasonal restrict: You can select to notify or not to notify a seasonal re- striction. Voice guidance in all modes: You can set the voice guide in all mode or not. Current street name: You can select to show or not to show a current street name on the map screen.
Page 106: Estimated Travel Time
Sienna_Navi_U (L/O 0309) “MENU” “Setup” Estimated travel time 1. Touch the tab on the screen to display the “Menu” screen, and touch the switch. L00059 L00133 “On” 2. Touch the switch of “Auto reroute”. If you can not find the item on the list, touch to scroll up or down the list.
Page 107 Sienna_Navi_U (L/O 0309) “MENU” “Setup” 1. Touch the tab on the screen to display the “Menu” screen, and touch the switch. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 108 Sienna_Navi_U (L/O 0309) L00134 “On” 2. Touch the switch of the Estimated travel time. If you cannot find the item on the list, touch to scroll up or down the list. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 109 Sienna_Navi_U (L/O 0309) L00135 To set average speeds: “Change speed” 1. Touch the switch of “Estimated travel time”. 2. Touch to set average vehicle speeds for driving on a freeway, main street and residential road. If you touch the “Default” switch, the default speed is set at each item.
Page 110: Adjusting Time Zone
Sienna_Navi_U (L/O 0309) Adjusting time zone INFORMATION D The displayed time to the destina- tion is the approximate driving time calculated based on the speeds you selected and your actual posi- tion along the guidance route. D The time shown may vary greatly depending on your progress along the route (which may be affected by road conditions such as traffic...
Page 111 Sienna_Navi_U (L/O 0309) “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch. L00162 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 112 Sienna_Navi_U (L/O 0309) “Adjust” 3. Touch the switch. The “Adjust time zone” screen appears on the display. L00163 4. Select your desired time zone. The selected switch is highlighted in green. Touch the switch and then touch “On” to set daylight saving time. “OK”...
Page 113: Distance Indication
Sienna_Navi_U (L/O 0309) Distance indication “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch. L00161 “km” “mile” 3. Touch to select your desired units. “OK” 4. Touch the switch. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 114: Notification Of Seasonal Restrictions
Sienna_Navi_U (L/O 0309) Notification of seasonal restrictions “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch. L00149 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 115: Voice Guidance In All Modes
Sienna_Navi_U (L/O 0309) “On” “OK” Voice guidance in all modes 3. Touch the switch of the “Notify seasonal restrict”. Touch the switch. The screen returns to the previous map. L00150 The restricted road icon and message will appear on the screen. 2004 SIENNA Navigation from Sep.
Page 116 Sienna_Navi_U (L/O 0309) “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch. L00164 “On” 3. Touch the switch on the right of “Voice guide in all modes”. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 117: Current Street Name
Sienna_Navi_U (L/O 0309) Current street name “MENU” 1. Touch the tab on the screen. L00059 “Setup” 2. Touch the switch. L00147 “On” 3. Touch the switch on the right of “Current street name”. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 118: Maintenance Information
Sienna_Navi_U (L/O 0309) The current street name appears on the Maintenance information map screen. NZN044 L00148 L00136 This system has a function which in- forms you of the time to replace cer- tain parts or components as well as other information shown screen.
Page 119 Sienna_Navi_U (L/O 0309) “INFO” “Maintenance” 1. Push the button to display the “Information Menu” screen, and then touch the switch. L00137 2. Touch your desired icon and input the conditions. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 120 Sienna_Navi_U (L/O 0309) Delete all: Cancel all conditions which INFORMATION ITEMS have been input. Reset all: Reset all items which satisfy Oil change either condition. Touch the switch on the “Mainte- “Off” L00138 nance” screen, “Information” Replace oil filter screen will no longer be displayed. INFORMATION Rotate tires D For scheduled maintenance infor-...
Page 121: Dealer Setting
Sienna_Navi_U (L/O 0309) Dealer setting (a) Registering dealer Replace brake fluid L00137 L00139 Replace ATF Scheduled maintenance You can register your dealer’s name “Set address. Touch dealer” switch on the “Maintenance” Replace air filter screen. Personal 1. Enter your dealer’s location address in the same way as you input any destination. (See pages 10 through 24.) 2004 SIENNA Navigation from Sep.
Page 122 Sienna_Navi_U (L/O 0309) (b) Editing dealer L00140 2. After you enter your dealer, the screen changes and displays the map location of the dealer. If it is OK, touch the “Enter” switch. The current screen changes to the screen where you can edit the data of your deal- er.
Page 123 Sienna_Navi_U (L/O 0309) EDITING THE NAME OF THE DEALER EDITING THE LOCATION EDITING THE PHONE NUMBER OR CONTACT L00143 L00144 L00142 Touch the arrows to scroll to your de- Touch numeral keys directly. Touch alphabet or numeral keys direct- sired point on the map screen. After you finish your entry, touch the ly to input the name.
Page 124 Sienna_Navi_U (L/O 0309) (c) Deleting dealer L00141 “Set dealer” “Delete dealer” 1. Touch the switch and then touch the switch. L00146 “Yes” 2. A selected point will appear. Also, a message will appear at the bottom of the screen. To delete, touch the “No”...
Page 125: Calendar With Memo
Sienna_Navi_U (L/O 0309) Calendar with memo (a) Inputting a memo L00185 L00153 L00153 “INFO” Push the button to display This system has a function which in- the “Information Menu” screen. Touch forms you the memo you entered. “Calendar” switch to display When the system begins operating af- the “Calendar”...
Page 126 Sienna_Navi_U (L/O 0309) 1. Touch directly on the day you want to input a memo. L00186 “Memo” 2. Touch the switch to display the “Memo” screen. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 127 Sienna_Navi_U (L/O 0309) L00160 3. Touch keys directly to input a memo. You can input up to 24 letters. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 128 Sienna_Navi_U (L/O 0309) (b) Adding a Memo After you input the memo, touch the switch at the bottom right of the “OK” screen. The previous screen will appear. You can input a memo until December 31. 2020. L00186 L00186 You can select your desired date and/ When you want to add a memo, touch “Chg.
Page 129 Sienna_Navi_U (L/O 0309) (c) Deleting a memo (d) Editing a memo (e) Memo list L00186 L00186 L00186 L00160 Touch the date which you already If you want to edit the memo, touch If you want to look at the memo you “Edit”...
Page 130 Sienna_Navi_U (L/O 0309) If you want to remove all of the date colors of date you input, touch the “Remove color of date” switch. A message appears on the display. To “Yes” remove the colors, touch the L00158 L00156 switch. To allow the colors to remain, “No”...
Page 131: Other Functions
Sienna_Navi_U (L/O 0309) SECTION OTHER FUNCTIONS Screen adjustment ......... Screen transition .
Page 132 Sienna_Navi_U (L/O 0309) Screen adjustment You can adjust the brightness or con- trast of the screen depending on the brightness of your surroundings. You also can turn the screen off. “DISPLAY” 1. Push the button. The following adjustment screen appears. NZN043 L00181 BRIGHTNESS: Adjusts the brightness of...
Page 133 Sienna_Navi_U (L/O 0309) Screen transition NZN044 NZN065 Depending on the position of the head- You can select a function that enables light switch, the screen changes to the automatic return previous day mode or night mode. screen from the audio screen. To display the screen in the day mode even with the headlight switch on, touch “DAY MODE”...
Page 134 Sienna_Navi_U (L/O 0309) NZN045 “ON” “OFF” “OK” 2. Select and then touch The previous screen automatically returns from the audio screen 20 seconds after the end of audio op- eration. OFF: The audio screen remains on. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 135 Sienna_Navi_U (L/O 0309) 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 136 Sienna_Navi_U (L/O 0309) SECTION AUDIO SYSTEM Quick reference for your audio system ..... . . Your audio system ......... Using your audio system .
Page 137: Audio System
Sienna_Navi_U (L/O 0309) Quick reference for your audio system “TUNE” knob Function switch display screen Turn this knob to move up or Touch the switches displayed on down station band. the screen to control the radio, details, see page 134. “PWR·VOL”...
Page 138: Your Audio System
Sienna_Navi_U (L/O 0309) Your audio system The slots for the cassette tape player and compact disc player are behind the display. To lower the display, push the “OPEN” button. After you inserting the cassette tape or compact disc, push the button L00004 again to close the display.
Page 139: Using Your Audio System
Sienna_Navi_U (L/O 0309) Using your audio system— —Some basics This section describes some of the basic features of the Toyota audio system. Some information may not pertain to your system. Your audio system works when the igni- tion switch is in the “ACC” or “ON” posi- tion.
Page 140 Sienna_Navi_U (L/O 0309) INFORMATION D If the system does not respond to a touch of a switch, move your fin- ger away from the screen and then touch it again. D You cannot operate dimmed switches. D Wipe off fingerprints on the surface of the display using a glass clean- ing cloth.
Page 141 Sienna_Navi_U (L/O 0309) (b) Tone and balance (c) Surround function How good an audio program sounds to Touching the “SURROUND” switch dis- you is largely determined by the mix of played on the screen at the audio con- the treble, midrange, and bass levels. In trol mode will turn on or off the sur- NZN030 fact, different kinds of music and vocal...
Page 142 NOTICE make sure it is removed before except a cassette tape into the slot. driving your Toyota through an au- Never try to disassemble or oil any tomatic car wash. part of the compact disc player. Do not insert anything except a compact z On−glass antenna (built−in on the...
Page 143: Radio Operation
Sienna_Navi_U (L/O 0309) —Radio operation (g) Your DVD player You can enjoy the sound of the rear seat entertainment system pushing “DISC” button. L00171 L00170 (a) Listening to the radio Turn the knob clockwise to step up the station band or counterclockwise Push these buttons to choose either to step down.
Page 144 Sienna_Navi_U (L/O 0309) (b) Presetting a station 1. Tune in the desired station. 2. Touch one of the station selector switches (1−6) and hold it until a beep is heard. This sets the station to the switch and the frequency appears on the switch Each radio mode (AM, FM1 or FM2) can To scan all the frequencies: Touch the store up to 6 stations.
Page 145 Sienna_Navi_U (L/O 0309) To scan the preset stations: Touch the “RDS SRCH” (RDS search) switch “SCAN” switch on the screen or push the This switch allows you to search all avail- “SCAN” button until you hear a beep. “P. able RDS stations out of the entire FM SCAN”...
Page 146 Sienna_Navi_U (L/O 0309) If no RDS stations are found, “No RDS To recall a radio text messages stored in Stations Found” will be displayed and the memory, touch “RECALL” switch. beep sounds. Then the radio will return Touching the “LATEST MESSAGE” will to the previous FM mode and frequency.
Page 147 Sienna_Navi_U (L/O 0309) —Cassette tape player operation (a) Playing a cassette tape To insert a cassette tape, push the “OPEN” button to lower the display. Put the cassette tape in the slot with the exposed tape side to the right and lightly push it in.
Page 148 Sienna_Navi_U (L/O 0309) To stop and eject the cassette tape, push NOTICE the “OPEN” button to lower the display. Push the “TAPE ” button. Do not obstruct the display while it is moving. It could damage your au- dio system. L00173 2004 SIENNA Navigation from Sep.
Page 149 Sienna_Navi_U (L/O 0309) ∗ : Dolby noise reduction manufactured under license from (b) Manual program selection Dolby Laboratories Licensing Corporation. “DOLBY” and the A " Touch “ ” double D symbol are trademarks of Dolby Laboratories Program switch: Licensing Corporation. switch on the screen to select the other side of a cassette tape.
Page 150 Sienna_Navi_U (L/O 0309) Push the lower side of this button to skip (c) Automatic program selection backward. Push the button until “REW” “RPT” switch: The repeat feature auto- and the number of programs you want to matically replays the current program. skip appears on the screen.
Page 151: Compact Disc Player Operation
Sienna_Navi_U (L/O 0309) —Compact disc player operation (a) Playing a compact disc NOTICE To insert a compact disc, push the Do not obstruct the display while it “OPEN” button to lower the display. is moving. It could damage your au- Put the compact disc in the slot with dio system.
Page 152 Sienna_Navi_U (L/O 0309) To stop and eject the compact disc, push the “OPEN” button to lower the display. Push the “CD ” button. The compact disc player can play the L00175 discs marked as shown above. The fol- lowing products may not be playable on your compact disc player.
Page 153 Sienna_Navi_U (L/O 0309) Reverse: Touch the “ ” switch and hold it to reverse the disc. When you release the switch, the compact disc player will resume playing. L00178 L00176 Push the “DISC” button if a compact (b) Selecting a desired track disc is already loaded in the slot.
Page 154 If the player still does not operate, have “RPT” switch: Use it for automatic re- it checked by your Toyota dealer. peat of the track you are currently listen- (c) Searching for a desired track ing to.
Page 155 Sienna_Navi_U (L/O 0309) —DVD player operation The indicator light turns on while the disc The DVD player can play DVD video, is loaded. audio CD, video CD, CD text, dts−CD or DVD audio only when a disc is If the label faces forward, the disc cannot loaded in the DVD player.
Page 156: Playing An Audio Cd
Sienna_Navi_U (L/O 0309) L00178 L00176 (d) Operating an audio CD PLAYING AN AUDIO CD CD text only—The disc title and track (c) Playing a disc SELECTING A DESIRED TRACK title will appear on the screen when pushing the “DVD” button. “SEEK/TRACK”...
Page 157: Searching For A Desired Track
Sienna_Navi_U (L/O 0309) Reverse: Touch the “ ” switch and hold it to reverse the disc. When you release the switch, the player will resume playing. SEARCHING FOR A DESIRED TRACK OTHER FUNCTIONS “RPT” switch: Use it for automatic re- Touch the “SCAN”...
Page 158 Sienna_Navi_U (L/O 0309) If a CD−TEXT disc is inserted, the title (e) Operating a DVD video disc of the disc and track will be displayed. CAUTION NOTE: The playback condition of some Up to 29 letters can be displayed. DVD video discs may be determined Conversational speech some...
Page 159: Playing A Dvd Video Disc
Sienna_Navi_U (L/O 0309) PLAYING A DVD VIDEO DISC This “DVD Hint!” screen appears when the video screen is first displayed af- Push the “AUDIO” button to display ter you turn the ignition key to “ACC” this screen. or “ON”. It you touch the “PICTURE” switch when Touch “OK”...
Page 160 Sienna_Navi_U (L/O 0309) “Hide Keys” switch: Touching this will “Audio”: The audio changing screen ap- DESCRIPTION OF DVD CONTROLS turn off the controls from the screen. pears. (See page 154.) Top page of DVD controls “Sub Title”: The subtitle changing screen If “...
Page 161: Selecting A Menu Item
Sienna_Navi_U (L/O 0309) SELECTING A MENU ITEM DVD video DVD audio Enter the menu item using “Y”, “"”, “B” and “A” switches and touch “En- SEARCHING BY TITLE Enter the group number by using the ter”. The player starts playing video “−”...
Page 162 Sienna_Navi_U (L/O 0309) SELECTING THE BONUS GROUP CHANGING THE STILL PICTURE CHANGING THE SUBTITLE LANGUAGE DVD audio only— DVD audio only— Each time you touch “Sub Title”, the language is selected from the ones Enter the bonus group number on the Push the “Still Prev.”...
Page 163: Changing The Audio Language
Sienna_Navi_U (L/O 0309) CHANGING THE AUDIO LANGUAGE Each time you touch “Audio”, the lan- guage is selected from the ones stored in the discs and changed. When you touch “Back”, the previous screen returns. DVD video CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the angle mark appears on the screen.
Page 164: Setup Menu
Sienna_Navi_U (L/O 0309) SETUP MENU There are initial setting switches on the “Setup Menu 1” screen and “Setup Menu 2” screen. To change the screen, push the “Top Page” or “Second Page” switch on the screen. After you change the initial setting, push the “Enter”...
Page 165 Sienna_Navi_U (L/O 0309) If you cannot find the language you want to hear on this screen, touch “Others” Subtitle language and enter a language code. For the entry language code, following You can change the subtitle language. “Entry of language code”. 1.
Page 166 Sienna_Navi_U (L/O 0309) 3. Touch a parental level (1—8) on the “Select Restriction Level”. Push the “Back” switch to return to the “Setup Menu 1” screen. Each time touch “Display Mode” on the “Setup Menu 2” screen, ENTRY OF LANGUAGE CODE the display mode is changed from wide mode to auto mode.
Page 167 Sienna_Navi_U (L/O 0309) 1412 Dutch 1620 Portuguese 0208 Bihari 0704 Scots−Gaelic 1922 Swedish 0209 Bislama 0712 Galician 1821 Russian 0214 Bengali 0714 Guarani 1115 Korean 0215 Tibetan 0721 Gujarati 0512 Greek 0218 Breton 0801 Hausa 0101 Afar 0301 Catalan 0809 Hindi 0102 Abkhazian...
Page 168 Sienna_Navi_U (L/O 0309) 1113 Cambodian 1401 Nauru 1912 Slovenian 1114 Kannada 1405 Nepali 1913 Samoan 1119 Kashmiri 1415 Norwegian 1914 Shona 1121 Kurdish 1503 Occitan 1915 Somali 1125 Kirghiz 1513 (Afan)Oromo 1917 Albanian 1201 Latin 1518 Oriya 1918 Serbian 1214 Lingala 1601 Panjabi...
Page 169: Playing A Video Cd
Sienna_Navi_U (L/O 0309) 2019 Tsonga 2020 Tatar 2023 2111 Ukrainian 2118 Urdu 2126 Uzbek 2209 Vietnamese 2215 Volapük (f) Operating a video CD 2315 Wolof PLAYING A VIDEO CD 2408 Xhosa Push the “AUDIO” button to display 2515 Yoruba this screen. 2621 Zulu When you touch the “PICTURE”...
Page 170 Sienna_Navi_U (L/O 0309) “Top Page” switch: Use this switch to “Main/Sub” switch: A multiplex transmis- display the operation switches on the top sion changing switch. The mode changes page. from Main/Sub to Main, to Sub and back to Main/Sub by touching this switch. “Hide Keys”...
Page 171: Dvd Video Discs
ALL: in all countries If the malfunction is not rectified: Take Number: region code your vehicle to your Toyota dealer. 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 172 Sienna_Navi_U (L/O 0309) Level 8: All types of the DVD video discs DVD VIDEO DISC GLOSSARY Manufactured under license from Dolby can be played. Laboratories. “Dolby”, “Pro Logic”, DVD video discs: Digital versatile Disc and the double−D symbol are trade- that holds video.
Page 173: Audio Remote Controls
Sienna_Navi_U (L/O 0309) Audio remote controls 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)
Page 174 Sienna_Navi_U (L/O 0309) Some parts of the audio system can be adjusted with the button on the steering wheel. Details of the specific buttons, controls, and features are described below. 1. Volume control button 2. “ ” button 3. “MODE” button Ny5001 2004 SIENNA Navigation from Sep.
Page 175 Sienna_Navi_U (L/O 0309) 1. Volume control button Push “+” to increase the volume. The Push “−” to decrease the volume. The volume continues to increase while the volume continues to decrease while the button is being pressed. button is being pressed. 2.
Page 176 Sienna_Navi_U (L/O 0309) There must be at least 3 seconds of blank space between tracks switch to work correctly. In addition, the feature may not work well with some spo- ken, live, or classical recordings. To fast−forward or reverse: Push and hold the “ ”...
Page 177: Car Audio System Operating Hints
Sienna_Navi_U (L/O 0309) Car audio system operating hints 3. “MODE” button Push the “MODE” button to select an audio mode. Each time you push this For example, nearby buildings and terrain button, the system changes between the NOTICE can interfere with FM reception. Power radio, cassette tape player, compact disc lines or telephone wires can interfere with To ensure correct audio system op-...
Page 178 Sienna_Navi_U (L/O 0309) Static and fluttering—These occur when Avoid using cassettes with a total CARING YOUR CASSETTE signals are blocked by buildings, trees, or playing time longer than 100 minutes PLAYER AND TAPES other large objects. Increasing the bass (50 minutes per side). The tape used For the best performance for your cas- level may reduce static and fluttering.
Page 179 Sienna_Navi_U (L/O 0309) CAUTION Audio CDs Compact disc players and DVD play- invisible laser beam which could cause hazardous radi- DVD video ation exposure if directed outside discs the unit. Be sure to operate the play- ers correctly. DVD audio discs Video CDs Compact disc player...
Page 180 Sienna_Navi_U (L/O 0309) DVD player Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy−protected CD Z17038 Z17037 CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM DVD−R DVD+R DVD−RW DVD+RW DVD−ROM Special shaped discs Labeled discs DVD−RAM NOTICE...
Page 181 Sienna_Navi_U (L/O 0309) Z17053 Z17052 Correct Wrong Handle discs carefully, especially when To clean a disc: Wipe it with a soft, lint− you are inserting them. Hold them on free cloth that has been dampened with the edge and do not bend them. Avoid water.
Page 182 Sienna_Navi_U (L/O 0309) 2004 SIENNA Navigation from Sep. ’03 Prod. (OM45414U)

Toyota SIENNA 2004 Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toyota SIENNA 2004

Summary of Contents for Toyota SIENNA 2004

Table of Contents